Dear All, One of the our customer bought Cisco ASR1001HX with these licenses. I have read that all licenses are RTU for ASR1000 series, however Cisco delivered paper licenses where PAK is written, that made me confused. List of licenses are these: C...
Forum Posts
Resolved! ASR1002-HX - Licence Query
Hi, I'm currently in the process of putting together a requirements list for the purchase of some ASR1002-HX Routers and am having some difficulty in understanding which licence is required in order to support IPSec on the Router. The product li...
Resolved! Help with VSS Design
Hi TeamI need your help with the following design:Right now we are working in a design for one of our customers, and we want to offer them 2 6504-E, with the Virtual Switching Technology.These are the components:- (2) Switches 6504-E, each switch ...
Resolved! BGP not advertising connected routes
Hello, Our old mpls is being cut off tonight, but when I completed a test our secondary datacentre doesn’t advertised the connected route at that site, can you give me some advice. The bgp config is below. Have you any ideas why the connected rout...
Hi, When creating a class-map on a 3850 you can't seem to match against an input-interface anymore. 'Match input-interface' is no longer a valid command. Does anyone know what the alternative command would be ? Many Thanks Paul
Resolved! ISR4431 NIM instertion - power off?
Hi, as far as I have seen, it is possible to instert a NIM-module while the device is running (the interfaces is available after the insertion), is this the correct way of doing it or is it best-practice to shutdown the device before inserting new mo...
We have this legacy 1721 Router with a T-1 connection at a very remote site. Somehow the port on the Dell 2708 switch went dark to the ethernet port of the router. Before I did troubleshooting over the phone I called the carrier to clear any errors o...
Resolved! logging in ASA CLI
Hello, When exectuing "show log" in ASA, I don't see anything ever. ASA/office(config)# logging ? configure mode commands/options: asdm Set logging level or list for ASDM asdm-buffer-size Specify ASDM logging buffer size buffer-size Specify loggin...
Dear Expert, I have 4 VRF (vrf01, vrf02, vrf03 and vrf04) and each VRF have 4 VLANs. 2 VRF's networks (vrf01 and vrf02) are most important and want to configure QoS on Cisco N9K switches. would you please advise me the procedure and CLI command for c...
Good afternoon everyone!Need to perform the translation of the policy applied in a Juniper router below: ================================================================ policy-statement export_pb-dados { term CONECTADAS { from { ...
Hello, I know, there are thousands discussion about nested QoS policies and shaping, but still I didn't found an answer for my question. Please explain again how it works (in this example it is 6880) So I have simple nested policy: policy-map typ...
I have one router with two default routes ip route vrf ivrf 0.0.0.0 0.0.0.0 10.1.151.6 track 1ip route vrf ivrf 0.0.0.0 0.0.0.0 10.1.181.6 100 track 2 And under ospf, I have default-information originate command. I would like to know which defaul...
Resolved! Cisco One - ISR 4400 Pros/Cons?
Good Day, We are currently working on implementing Unified Communications in our environment with ISR 4400 Routers. CON-ECMU-C1A4400S - Advance UC perpetual License ISR 4400 CON-ECMU-C1F1PISR - Foundation Perpetual License ISR 4400 At this time m...
Hi Champs, anybody know the fix for the bug CSCvi55878. i have searched everywhere including cisco security advisory. but i couldn't find out. anyone can help on this?
Good Morning All, I am running into some issues with my home network. I have gig internet from cox and the modem router combo they gave me isnt a great router. so i was trying to set up a layer 3 switch to act as an interim router and connect my ow...
| User | Count |
|---|---|
| 14 | |
| 6 | |
| 3 | |
| 2 | |
| 2 |
