Routing

In Packet Tracer, I noticed that when you configure OSPF multiple areas...OUTSIDER Area routes automatically show up in the Routing Table. But for OSPFv3 they don't. Does this sound right?  In my lab, Only Area 1 interfaces know about Area 1 networks...

Interior------------------fe 0/1  RouterA ser 0/0/0------------------------ser 0/0/1 RouterB---------------------*Internet* Where do I configure the default route again so that Router A knows what's coming from and should go to the Internet?  

Hi everyone.Not much time ago we bought a ISR 4451-X with IOS-EX OS on it. And now we have some problems with static nat rules. Here is a confog for NAT Rules:interface Port-channel1.100 description ---To_Internal_Network--- bandwidth 1048576 encapsu...

Hi, My router reload with a FPU exception error, what would this mean, how do I resolve this issue? regards,py 

Hi All Recently acquired a new ASR 1002 to replace my PE router(cisco 7206 G2 engine).The old cisco 7206 was connecting to cisco 7609 which is the gateway router with no problem.After replacing the ASR 1002 with cisco 7206,the link connecting to the ...

I'm configuring a router for a new internet connection and I'm running into a small issue but it has me stumped so far.  This is the first router I have set up from scratch. The ISP gave us two IPs, and their WAN Serial and default route. I assigned ...

This question is about a CISCO1941/K9 router, Version 15.0(1r)M15.When I typereload in 4it asks meSystem configuration has been modified. Save? [yes/no]:% Please answer 'yes' or 'no'.even thoughshow archive config differences system:running-config nv...

Do they exist and what kind of traffic would be occuring in such Networks?