hello all :)
i have a cisco2811
but, fatal(?) problem exec!!
situation this.
consol cable connected - power on - flash memory(64mb, new) - putty
and i see rommon 1 >
but, does not enter any key.
belived? does not enter any key.
i want to use rommon mode! and upgrade c2800nm-advipservicesk9-mz.124-24.T6.bin
to ciscoflashmemory(64mb)
more information below
please answer my question
--------------------------------------------------------------------------------
System Bootstrap, Version 12.4(13r)T5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2007 by cisco Systems, Inc.
Initializing memory for ECC
.
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
loadprog: error - Invalid image for platform
e_machine = 134, cpu_type = 135
boot: cannot load "flash:"
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
loadprog: error - Invalid image for platform
e_machine = 134, cpu_type = 135
boot: cannot load "flash:"
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Upgrade ROMMON initialized
rommon 1 >