Configuring Multilink PPP

[christopher_hall]

We've purchased a 2911 router and a vwic3-2mft-t1/e1. I've inserted the card and configured card type, but my experience with these cards is that after adding a card, it should add serial interfaces. I'm obviously missing something. What I'm trying to do is to configure multilink for a bonded T1. Any help would be appreciated.

Chris

[Richard Burts]

Chris

You are on the right track. After configuring the card type you need to configure the controller. Under controller T1 0/0/0 add something like this

 channel-group 1 timeslots 1-24

That should add the serial interfaces where you would configure MLPPP.

HTH

Rick