After an EPLD upgrade 5.1.1 on my Nexus 7010. One LineCard disappeared and the following output in the log was generatet.
2011 Feb 4 16:26:07 tceh84 %PLATFORM-5-MOD_STATUS: Module 4 current-status is MOD_STATUS_POWERED_DOWN
2011 Feb 4 16:26:17 tceh84 %PLATFORM-2-MOD_DETECT: Module 4 detected (Serial number JAF1353ARNS) Module-Type 10 Gbps Ethernet Module Model N7K-M132XP-12
2011 Feb 4 16:26:17 tceh84 %PLATFORM-2-MOD_PWRUP: Module 4 powered up (Serial number JAF1353ARNS)
2011 Feb 4 16:26:17 tceh84 %PLATFORM-5-MOD_STATUS: Module 4 current-status is MOD_STATUS_POWERED_UP
2011 Feb 4 16:26:54 tceh84 %BIOS_DAEMON-SLOT1-5-BIOS_DAEMON_LC_PRI_BOOT: System booted from Primary BIOS Flash
2011 Feb 4 16:48:33 tceh84 %PLATFORM-5-MOD_STATUS: Module 4 current-status is MOD_STATUS_ERRDOWN
2011 Feb 4 16:53:40 tceh84 %PLATFORM-5-MOD_STATUS: Module 4 current-status is MOD_STATUS_ERRDOWN
2011 Feb 4 16:53:40 tceh84 %PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 4 failed to power up. (Unknown card. Could not get software-card-id)
I have found a description for this log entry
Error Message
PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module [dec] failed to power up. (Unknown card. Could not get software-card-id)
Explanation
The module cannot be powered up due to missing SWID in core-plugin for thiscard ID.
Recommended Action
Enter a 'show platform internal all module [decimal digit]' and 'show module internal all module [decimal digit]' 'show sprom module [dec] [dec]' to read module IDPROM contents to collect more information.
has anybody an idea what I can do ?
should I change the LineCard
Thanks for your help
