Dear Respected Members,
I have tried to configure Cisco 2911 Router with EHWIC-VDSL Module for my friend. He is based out of Egypt and His ISP is WE/TEDATA (TELECOM EGYPT)
This is the configuration that I did but its not negotiating or authenticating at all also I have attached the screen shots of his original WE/TEDATA Router
interface ATM0/0/0
no ip address
atm ilmi-keepalive
pvc 0/35
pppoe-client dial-pool-number 1
!
interface Dialer0
mtu 1492
ip address negotiated
no ip redirects
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer idle-timeout 0
no cdp enable
ppp authentication chap pap callin
ppp pap sent-username MYISPUSERNAME password MYISPPASSWORD
interface Ethernet0/0/0.101
pppoe enable group global
ip route 0.0.0.0 0.0.0.0 Dialer0