cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
382
Views
2
Helpful
3
Replies

SLA Class - strict - AAR

ChrisNewnham_
Level 1
Level 1

I have a question.

If configuring an AAR policy, and you set the SLA Class to strict with a preferred colour, does that render the SLA class performance moot, as even if the SLA is breached, it will still only use the "strict" colour?

Thanks!

2 Accepted Solutions

Accepted Solutions

balaji.bandi
Hall of Fame
Hall of Fame

If the Preferred route not available, then if other SLA matches it uses that path - again it all depends how this was configured on the policy - better look below example : (for understanding)

Configure Application-Aware Routing Using CLIs

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/ios-xe-17/policies-book-xe/application-aware-routing.html#c_Application_Aware_Routing_Policy_Configuration_Example_12237.xml

Good video explanation :

https://www.youtube.com/watch?v=FbLagRvX04s

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

Hi,

preferred color + strict = if there is no path that meets SLA using preferred color > then traffic is drop

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

View solution in original post

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

If the Preferred route not available, then if other SLA matches it uses that path - again it all depends how this was configured on the policy - better look below example : (for understanding)

Configure Application-Aware Routing Using CLIs

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/ios-xe-17/policies-book-xe/application-aware-routing.html#c_Application_Aware_Routing_Policy_Configuration_Example_12237.xml

Good video explanation :

https://www.youtube.com/watch?v=FbLagRvX04s

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi,

preferred color + strict = if there is no path that meets SLA using preferred color > then traffic is drop

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

ChrisNewnham_
Level 1
Level 1

Thanks - much appreciated!