We have a pair of Nexus 5672 switches in a vPC configuration, each with a FEX attached.
I cannot create a non member port on the FEX switches, I have to create a corresponding unconnected port on the second FEX switch before the actual connected...
Hi Below is configuration for a router. The below authentication command can work well with its key work "local".
My question is the second "local" in authorization command can work well just based on the below configuration? Maybe we need to add so...
Hi all,
Does anyone have any information regarding what Cisco equipment will eventually replace the C2960X when it goes EOL? Like most of you, we have several thousand 2960X deployed on our networks and several large scale deployments planned in th...
I purchased a Cisco SG200-26 Gigabit Ethernet Smart Switch with 24 10/100/1000 Ports and 2 Combo Mini-GBIC Ports (SLM2024T-NA) in September of 2017. It was put into service October 2017. Was working flawlessly until last week. I now have no connectiv...
Hi All,
When I try and apply any of the policy-maps outbound on a Vlan interface it accepts the command but does not apply the configuartion. Has anyone experienced this and does anyone know why it doesnt apply? The config is below. All three Poli...
Good morning guys,
A very quick question. If I have an LCAP etherchannel consisting of 2 physical 1Gb/s interfaces. Does the channel get aggregated to 2Gb/s throughput?
My understanding was that whilst theoretical throughput would be 2Gb/s, actu...
Hi, newbie here.
I'm trying to test/debug a custom router, now I'm working on multicast, but not sure if it's my misunderstanding or router bug(I won't surprise if it is from previous experience).
The topology is fairly simple:
one router.
PC A ...
We had an IPT conversion last Friday, and a 3560-48 PoE switch just would not deliver any power. Tried a reload, shut/no-shut the ports, and no power inline/power inline auto on all ports configurations. I wonder if there is some kind of internal fus...
I'm trying to trace the connection between Main SW and Distribution SWfrom main SW , i follow the sh cdp neig detailbut when i ssh to the IP of the neighbor SW, it seem like it going to different SWHow is it possible ?
Hello,
I recently got a new ASR1001-X running Cisco IOS XE Software, Version 16.04.01.After trying now 4 days without success creating a simple bridge between 2 ethernet interfaces I decided asking here.
All documentation that I found stated somethin...
Hello,
I think I found a bug although I am not sure, so please help.
I have 2 cisco with the image c1841-adventerprisek9-mz.123-14.t5.bin
those 2 have VPN in between them...for some reason, they are restarting at the same time. I am thinking it is ...
I been instruct to register our devices to new destination of Tacacs ISE server, but when tested, i not able to communicate with the ISE server, why is it ? below is the config
Hi,One of my clients uses the macro function on their Catalyst 2960 access switches.This macro is of this type:macro auto execute XXX {conf$ INTERFACE interfaceswitchport access vlan 508switchport voice vlan 210no service-policy input QOS-BA-Userserv...
Hi Team,
I'm currently working on creating a standard configuration for switches connecting the firewalls (DMZ Switch). Can you please suggest what would be considered as the most important commands that can be used in this scenario? Apart from the u...
