Resolved! Q in Q
Hi friends which cisco platforms support q in q feature? i search the cisco feature navigator but I get confiused. thanks best regards
Forum Posts
What is the command to view the transceiver serial numbers for the FEX uplinks to the Nexus 5K? The show inventory and show interface transceiver commands on the 5K only show the info on the 5K interfaces.
Resolved! A problem with NATIVE_VLAN_MISMATCH
Hello, In the following topology, I was asked to implement the inter-vlan routing on the layer 3 switch MLS. The activity progress counter shows 100% but I see a vlan mismatch on both of S1 and MLS. I don't understand the reason. %CDP-4-NATIVE_VLA...
Hi, We are facing some typical issue with switching. We have multi vlan scenario; vlan 10 - 192.168.10.0/24 Vlan 11 - 192.168.11.0/24 vlan 12 - 192.168.12.0/24 vlan 13 - 192.168.13.0/24 vlan 14 - 192.168.14.0/24 we have servers in vlan 14 & swi...
Hi, I have a router C881-k9 connected on wan port fastethernet4 to the ISP modem, which provide internet with 1 public IP address and I’ve been asked to configure the following to get the internet working from my LAN: Wanip2 is assigned on fastethe...
Hey, I'm getting this error while assigning an IPv6 address to sub-interfaceS (G0/0.10-40), I don't know why it worked fine with IPv4 but not with IPv6. I'm using the same addresses and masks my instructor gave me. Thanks. ***Error: 2001:D00::/...
Hi friends; I have a problem with configuring Qos in my edge router. the edge router is 3845 and when I config a shape command in the outside physical interface, the cpu usage receive up to 99%, but my traffic is less than 70 Mbps. without Qos conf...
Hello Attach is the image file showing server having two different NIC connected to two different Layer 2 switch. Now my query 1) How in packet tracer we can use NIC teaming in server 2) if suppose one link goes down how it can transfer it to other...
Hi, We are using Cisco 2960X switch with IOS version 15.2(4r)E3. We are using 802.1x authentication and using Microsoft NPS as radius server. With the earlier IOS, we were able to configure two radius server for fallback with following command: Route...
I am trying to ping from a pc LAN 1 to a Webserver having IP address 8.8.8.8. The PC LAN 1 is a VLAN 20 having IP address 10.1.20.10 subnet mask 255.255.255.0 and I have designed a switch virtual interface (svi) for it having IP address 10.1.20.254 s...
Hello Guys, I am planning to buy new Cisco switches. Redundancy , QoS for VoIP, Dynamic Vlan Assignment is major considerations. Need three of 48 port switches or five of 24 port switches , which option should i choose (24 port or 48 port)? ...
I have an existing IOS BGP configuration that has a distribute-list in the config: neighbor X.X.X.X distribute-list CEREDO-FILTER-LOOPBACKS out I just found out NX-OS does not support distribute lists. Can anyone tell me my options? Route-map? ...
Hello we are wanting to only allow certain logon users access to certain commands and privilege levels. I see you can do this simple user account and parser view configuration on switches and routers. I understand you can also do this with a TACACs s...
Having a problem trying increase vlan20 to have 64 addresses rather than 32 to fit in the following VLAN config 10 Server 10.21.112.0/27 10.21.112.30 255.255.255.224 20 CCTV & SECURITY (DOOR ACCESS) 10.21.112.32/27 10.21.112.62 255.255.25...
Hello, I have been getting DHCP issure with RV325. RV325 is main router and we have a RV082 that is purposed to subnet. RV325 ip is 192.168.1.0/24 and RV082 ip is 192.168.100.0/24 We are using only VLAN 1. Connection is like this. RV325 (LAN 14port,...
| User | Count |
|---|---|
| 11 | |
| 11 | |
| 10 | |
| 9 | |
| 6 |
