Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Hello   We are hooking up a Dell storage server to our Nexus 3k pair and would like a sanity check on the config. We propose using a VPC on the Nexus side and standard NIC bonding on the Dell side. Here is the draft Nexus config:   interface port-cha...

Hello   We are looking to replace a legacy 3750G pair with a pair of Nexus 3Ks. We're specifically looking at the N3K-C3172PQ-10GE. Our ToR switches are Dell N2048s and 5548s, which are currently connected to the 3750Gs using 1G copper. Since the 317...

I have the following statement in an ACL on a customer's border router: 10 permit tcp any any established (48131145 matches)I was curious if there was any opportunity to write a similar rule for udp, or whether writing a rule that uses "established"...

Hi , may I know on a ASR 1004 router or something similar, I do see people using this command to set the boot path to point to the IOS.   boot system flash bootflash:"name of IOS"   Is there a need for this word "flash"(highlighted) instead of  boot ...

Hi All   Help me   Switch 3650 (WS-C3650-24TD) Cisco IOS Software, IOS-XE Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.07.02E RELEASE SOFTWARE (fc1)   show proc cpu sorted | ex 0.0Core 0: CPU utilization for five seconds: 12%; one minute: 12%;  fiv...

Hello, I have a Cisco ISR4331/K9 router. Trying to determine if the following is loaded:      VWAAS-RTU-1300      ISRWAAS-RTU-750 Are these licenses? What command will show if these are on the router? Thanks for the help.  

BC-VA by Level 1
  • 728 Views
  • 1 replies
  • 0 Helpful votes

Hi All,   is there a specific link for where I can find out about the specific power cords which are needed for the devices, in terms of the correct part numbers etc....   I have a few devices which do not have cables, but I don't know where I can ge...

cknox1 by Level 1
  • 686 Views
  • 5 replies
  • 0 Helpful votes

Hi Guys,   In regards to end of life devices, are theses completely out of warranty etc with Cisco? I assume that if one goes faulty, it would be the case of purchasing the newer model which in turn would be within warranty?     If anyone could provi...

cknox1 by Level 1
  • 387 Views
  • 3 replies
  • 0 Helpful votes

I have the below errors appear on core switch ws-c6513-E, how to fix it. May 8 10:34:21.818: %CONST_DIAG-SW1-6-DIAG_SW_LPBK_TEST_INFO: Module [2/0]: TestMgmtPortsLoopback detected a minor error for port 1May 8 10:34:21.818: %CONST_DIAG-SW1-6-DIAG_SW_...

Hossam Ar by Level 1
  • 745 Views
  • 4 replies
  • 0 Helpful votes

Hi everyone, I am having a single switch 3850 48 port series and it has currupted ios in it. It is not booting due to the currupted IOS. I am having a .bin file downloaded from another switch using TFTP which is around 300 mb in size. I was trying to...

Resolved! IOS download sites

Hi Team,   When i go to download the cisco IOS the site is asking cisco.com ID that i dont have , kindly help me to get the IOS because its very urgent ...   Please help soon