Hi, everyone who can help me, this log is presented to us and the router restarted. Does anyone know what it can be? Thanks! Log Buffer (4096 bytes):23645C5Cz 23645EC4z 2363CECCz 23682E48z 23682E2CzJan 9 10:59:34.436: %TCP-6-NOBUFF: TTY0, no buff...
Hi, everyone who can help me, this log is presented to us and the router restarted. Does anyone know what it can be? Thanks! Log Buffer (4096 bytes):23645C5Cz 23645EC4z 2363CECCz 23682E48z 23682E2CzJan 9 10:59:34.436: %TCP-6-NOBUFF: TTY0, no buff...
We currently have an existing connection between a 4500 switch and a 2950G. it's a trunk with fiber on the 4500 end and a fiber to copper media converter on the 2950G end. When I move the connection from the 4500 to our 6807 switch with the same co...
I’m running into an issue between a Brocade 7450 and an IE 4000 when running VRRP version 2. They sync with the default gateway and the Cisco shows master and Brocade backup. When we shut the Cisco switch down the Brocade shows as master but we can’t...
Hi i have build up a trainings network with a C891F Router The Router have the internal IP 192.168.51.1 and Outside 192.168.50.216 The VPN Clients get an ip address from 192.168.52.100 - 192.168.52.150 this is all working. now i want to se...
Hello, I am trying to setup a lab and running to an issue planning out the implementation. I am seeking feedback and suggestions on drawbacks and/or faults in the concept. My goal if possible is I have two L3 capable switches (48 port switche...
Hello everyone! I have a doubt about if it is possible to connect a 3560 switch to two 5548 nexus in vpc mode. I suppose that i have to configure a portchannel on the catalyst, i haven´t found this topology with this switch, only with the 3850 or 365...
We are facing issue of high bandwidth utilization over switching network. We have the multiple Leased line customers running in same scenario as attached:- At switch port, interface in layer 2 configured i.e interface is in access mode, working in ...
Hi all, I would need to change the MTU to 1504 on a C3650-48TS to support Q-in-Q, but it's not clear to me whether a reload is required in this case. In this document, there is no mention of a reload; https://www.cisco.com/c/en/us/td/docs/switche...
what are ipv6 static route types ?
Hi community, I have a question on interface templates. I created one and want to apply to a trunk port which contains the "usual commands" with vlan filtering. Can I apply the template in parallel and will there be any downtime or impact on traffi...
Hi Guys, I have successfully implemented 802.1X port authentication in our environment using a Windows 2016 NPS server as the Radius server. I’m happy to say that the configuration is working as expected. My boss has recently had some complaints fr...
what does ethernet uses , csma/cd or csma/ca ?
Hi, My Catalyst 6509 with Supervisor Engine 2T have high cpu utilization issue, we hope to know which traffic imapct and cause the high CPU utilization. As I know the Supervisor Engine 2T not support the "monitor session type local" command. Is ...
Hi all, Anyone has bought or has some experience with SG350XG and SG550XG Cisco Stackable Managed Switches? I was wondering if they are good value for money. I understand that they are non-IOS and the low end of the switching portfolio. Thank you,...
Dears, can i know from i got the latest firmware of SW and Rs ? instaed of cisco.com ? thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-24-2024 02:27 PM | ||
04-19-2024 05:58 AM | ||
04-17-2024 03:50 AM | ||
04-15-2024 06:06 PM | ||
04-12-2024 05:48 AM |
User | Count |
---|---|
11 | |
11 | |
10 | |
9 | |
6 |