Switching

Hello everyone, I have a pair of Nexus 5548 which are vPC peers connecting a few single-homed FEX's (2232 and 2248). Many servers are single- or dual-homed to either FEX or N5k's interfaces and this is a production network. Per-interface BPDU filter ...

How to configure Vlan in Router and how to allow two port in one vlan in router   suppose Ihave create vlan 1 interface ip 172.141.0.1/16 Ihow i will give access fa0/0/and fa0/1 port to vlan 1  

I have a contained environment where I just want my servers all to have the same time. I want them to pull that time from my 3750. What do I have to enable on the 3750 to be the NTP clock source.Keep in mind that the 3750 will not be getting the sou...

D​ear fellow engineers,   I have four switches in a network topology with PAgP Ether-channel trunks between them.  My question is can I mix Ether-channel modes in the same network?  Can I have two switches with static Ether-channel and have two switc...

Hello all, I just need help to get Access layer switch can give connectivity 1000 base to end users. Also,it has up link 10GB RJ45 really I try to search about switch 2960 but the problem how i can get Switch with Uplink 10G ( RJ45)  

Existing n/w topology                             WAN                    Watch guard firewall                                                 Server switch D LINK                 D LINK Access Switch -LAN - WIFI                          Servers   Pro...

Hola necesito colaboracion con el siguiente inconveniente que estoy presentando al configurar un switch CIsco Catalyst Capa 3 C3750-48TS-S   realice la creacion de 5 vlans: Vlan2, Vlan3, Vlan4, Vlan10, Vlan11 configuré el VTP, switch 3750 en modo ser...

Hello all,   I'm having trouble understanding some core concepts of OSPF.  Hoping someone can shed some light.  Please see attached.    In the RED box:  OSPF multiple area concept states OSPF areas should be limited to routers being in the same subne...