Hi All
I configured netflow on Nexus 7000 but I am not receiving any netflow traffic.
I followed a configuration guide, and even found an older blog on this issue but I am still stuck. Please help.
Here is my config:
flow exporter TestFlow destin...
Hi,Our customer has the following switch Stack:STACK1:Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- 1 30 WS-C3750E-24TD 12.2(4...
Hi Folks,
This is Jaishankar, I have upgraded 3 times the compatible IOS versions but still i am getting Vulnerabilities in the devices. Can any 1 let me know what is the challenge.
Currently i have flash:c2960s-universalk9-mz.152-2.E7.bin IOS ve...
Hello everyone
I have backbone Cisco 4500 series and Just only one core switch , I have star topology and access switches are Cisco 2960.
Every SFP module connected to 2960 and It has connection from Linksys SRW248G4, and from Linksys to HP 1910
...
Hi,
I have two ISP, primary line is 50 MB ILL, secondary line is 30 MB ILL connection, and also i'm using Cisco ISR4321 model router. the current configuration is primary ILL line configured in WAN0, secondary line configured in WAN1 port. and also...
Hi all,
We're having issues at work configuring a 2921 with a 4 port EHWIC switch module and was hoping for some assistance.
Question 1) We can see the switchports on the router, and I've read we need to create a logical trunk on the backplane so...
Hi there is one concept not very clear. Tag/Untag is a concept which is only used for a trunk link between two switch. So, it should be like this: when a frame enter one trunk port, a 4 byte tag is added to the frame and then when the frame leave the...
HelloWe have a problem with our new Switch WS-C3850-12S. We try to put it into the cisco network assistant but we only get the message"Unsupported Device". Has anyone an idea to make the software running also for this switch? Thanks in advance
Hello,
I am redesigning our DC and had a question regarding vPC in a dual-sided vPC configuration. The document below states and shows that when configuring dual-sided vPC, a NX5K or pair for redundancy is required. My question is, do the intermed...
hi
i have a WS-C3850-48XS with ipservices license and SW version 3.07.04E and a WS-C3850-12XS ipbase license and SW version 16.6.2. I am planning to stack these two with 48xs has switch 1 and 12xs as switch 2 and also upgrade the 48XS to 16.6.2....
I have a lab for school I need to do and I am lost!
Following requirements:
Create a large network.
A the very least you will have the following devices on your network:
10 Computers
3 printers
4 Mobile Devices
4 servers
connect 5 devices wirelessly....
Hey guys,
I have a catalyst 3850 and there are the following lines in the running config:
wsma agent exec profile httplistener profile httpslistener!wsma agent config profile httplistener profile httpslistener!wsma agent filesys profile httplistener ...
Hi Team,
I have cisco 3825 running with "c3825-advipservicesk9-mz.124-15.T9.bin" where some time the packets are encapsulating but not decapsulating.
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0#pkts decaps: 4, #pkts decrypt: 4, #pkts verify:...
Hi everybody,
I'm really doubtful about a situation I'm experiencing at work.
Here's the summary.
Few years ago, the company I work in deployed five 2960 switches access in order to connect APs.
Only one of these five switch was used as a 'node' ...
