Switching

we have server, desktop, laptop, wireless ap, voice gateway, for access level switches, do we need server switches, laptop switches... or we can put all non server device into blade switches, other purpose of blade switches is to connect to other acc...

We purchase large amounts of the 3132Q switches for our customer contract.  On occasion, it is necessary to wipe a switch clean after it has been configured for a cancelled order. Up to now, the customer has done the wipe, to use the switch with a ne...

Hi i just wanted to confirm that a routers main job is to forward ip packets. However a router can only pass an ip packet to an ip address that is directly connected making it look like ur using a series of gateways. A static route and a dynamic is u...

Dears, I would like to discuss regarding VPN Site to Site 'N' Number of showroom are connected to main office through VPN site to site. Showroom side CISCO887VA router is configured Main office cisco router 2900 series and ASA firewall  ASA5520( All ...

Hello all, I need help trying to manually intervene and stop a newly purchased used Cisco 2811 router that loops and keeps trying to upgrade the ROMMON and self decompress the image? Here's the message: Writing crashinfo to flash:crashinfo_20170418-0...

Dear Team   I have cisco WS-C3650-24TS  Switch with IP service Licenses.  and facing issue is i unable to use Ip Nat pool command on this which i needed .

I try to change the ssh access port in many sw,  I have done it by Catalyst 4500 L3, Version 15.1(2) with the comand " ip ssh port" succesfully, but also I have a catalyst 2960G, Version 12.2 (50) SE5 and the command port it is not available,So I hav...

Hi Guys,I read some articles the different between Unicast and Broadcast.Let me explain what I understand from that, then please correct me if I am wrong.When Source Frame Host-A tries sending Frame to Destination Frame Host-B. SWITCH will looking MA...

I need Cisco 10Gx24 port nexus series switch. I have chosen 3524x model. This switch are all sfp+ port. now my question is do I have to purchase 24 sfp module separately for this switch or all are built in sfp port. I need to clarify this.