Switching

Hi guys, I've got Prime Infrastructure 3.0.2 installed and I'm trying to get Plug and Play (PnP) working with CNS on PI. - The switches we tend to deploy are 2960X, 3560-C/CX and I have got our Windows DHCP server configured with Option 150 to point...

Is anyone using 40g span ports for traffic monitoring?  

Hi Guys, i dont play with snmp everyday and need to respond to urgent requirement.  Can somebody tell me exact OID for link up and link down for Cisco IOS 12.4. I am currently testing 3640 in GNS3 so for my testing purpose it will suffice. Also pleas...

We are using IP SLA with our SilverPeak devices.  We use the verify-availability to make sure traffic is not black-holed.  The problem arises with 2 offices that do not support this command.  (I'm not sure why this one command is not available but it...

Hi. Can a VDC in a Nexus 7000 handle a full BGP routing table? I'm told that a full table contains about 400 000 routes.The Supervisors in the Nexus are Supervisor Module-1X (N7K-SUP1) According to show system resources, they seem to have 8G RAM: Mem...

Im having an issue with eigrp automatic summarization, we have an eigrp neighbprship on 10.1.100.0/24 and we're trying to advertise a loopback 10.1.3.1/30 on a router (on which automatic summarization is enabled),but when we verify the routing table ...

Hi all, Hi have deployed recently a network with cat 3650 with 802.1x, after putting the network in production we notice that all the ports are with output drops on all access switchs. GigabitEthernet1/0/21 is up, line protocol is up (connected)   H...

Hi Everyone... Good Afternoon pls help me how to apply vlan access-list? Task to apply... 1) VLAN 2 (HOSTEL A), VLAN 3 (HOSTEL B)..ONLY FOR ACCESS FTP SERVER VLAN 6 & ACCESS WEBSERVER (VLAN8).. 2)VLAN4 (STAFF) ONLY FOR ACCESS DNS SERVER (VLAN7). &...

just for fun, explain this???!!!HOCT-LG#ping 10.198.147.150Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.198.147.150, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 999999999/858993458/42949...

I have installed  a Cisco CWDM-SFP10G-1470= in our core switch VSS (cat4500e-UNIVERSALK9-M), Version 03.08.01.E). It works but I was suprised it is shown like: Te1/1/32  **UPLINK-DC03-SW00 connected    trunk        full    10G Unknown SFP+ Is this n...