Switching

Hi Experts, We have two LAN networks. One for internal server and one for DMZ servers.We need to create  backup VLAN, could you please recommend if there is a best practices, moreover should we create two backup VLAN -one for internal servers and one...

I have just started using ACL's in my environment. After creating all the ACL's I want in place I started monitoring to see what was denied. The one thing that I keep seeing is access to tcp port 33621denied. It looks like just about every host in my...

Hi! I would appreciate if you could help me answer if my concerns are valid. I built a new network with 1 core + 7 access switches. All switches are 3750G. Core has an IP 10.100.1.1 and all access switches have their default route pointing to the co...

hi All, I receiving this error message while doing port channel configurations. %EC-5-CANNOT_BUNDLE2: Gi3/0/5 is not compatible with Gi2/0/9 and will be suspended (trunk mode of Gi3/0/5 is dynamic, Gi2/0/9 is access)

what need to be checked on LAN switches to confirm the issue is not with switches? Also we are using HP switches in some offices where the IP phones are rebooted automatically? what are the things i mainly need to check on LAN switches? thanks in a...

I am looking to confirm if there is a way I can filter the routes I send out on neighbor by neighbor basis. My question comes from the fact I am running EIGRP, have multiple neighbors on a single interface (Tunnel interface on hub for DMVPN) and not ...

Dear Team, We were trying to integrate mail server to Prime Infra 2.2 for notification emails. Unfortunately we were not able to successfully send test email from prime. Whenever we are trying to send a test email it is showing that sending email ......

I have a 2232PP 32 10G port FEx connected to a Nexus 5596UP via 8 10G Fivers. All 32 ports on the FEx are expected to be connected to hosts. The hosts connected to this FEx are in 4 sets of 8 hosts each. At any point in time I expected only any ONE s...

Not sure if this belongs in switching for wireless.  I have a weird issue on a 3650 switch.   -The network is all flat 192.168.1.0/24.   -Switch interface VLAN is the default gateway of all PCs and wireless at @192.168.1.1.   -Switch has default rout...