Hi,I'm trying to set up a C9200L-24T-4X-E-RF switch. I'm setting it up using the following commands but it seems the configuration is not being saved between reboot.switch: boot flash:/cat9k_lite_iosxe.17.03.05.SPA.binSwitch>enableSwitch#config tSwit...
hi all,so this is what it looks like when i ssh in the switch, as you can see i need to go into "enable mode"login as: admin Keyboard-interactive authentication prompts from server: | Password: End of keyboard-interactive prompts from server 4510MCR0...
Is there a way to look up a serial number or assembly number and have it can tell me the date that it was manufactured or even maybe even purchased? I am trying to do with with 3750gs, 4506, 3550, and some line cards. Any help would be greated apprec...
Hi,I use Cat9300 with App-Hosting Wireshark in conjunction with RSPAN VLANs as capture destination.! app-hosting appid c9kwireshark app-vnic AppGigabitEthernet trunk vlan 999 guest-interface 1 mirroring vlan 101 guest-interface 0 guest-ipa...
In a recent attempt to improve security somewhat I've started implementing DHCP snooping on my network. The network is a mix of 2960L and X and 9200L's and 9300L's.However the first thing I notice is that cpu usage skyrockets and in some cases even h...
I am evaluating purchasing a handful of IE-3300-8U2X-A switches for a remote site monitoring system. Each switch will run 2-3 803.2bt type3 class6 PTZ cameras. One will run 3 of those PTZ cameras as well as an additional 802.3at type2 class4 camera. ...
Hi,nxos.9.3.12.binHaving a strange issue with our N9K's. There a re long pauses between any commands entered. Checked logs and saw:2024 Feb 16 15:55:50 DC3-N9K-BGW01 %TACACS-4-TACACS_WARNING: Problem during name-lookup. Error:-3(temporary failure i...
How do i configure port mirror/span port in catalyst 3650 through web interface or cli . I want to mirror the all 20 ports on to one port
Hi , Looking for few clarification on DAD link on Catalyst 9500 switches. 1. is DAD link a must to form Stackwise Virtual? 2. Can DAD be formed on a 1 G copper or 1 G Fibre links? Regards
Can I interconnect several IE-4010 4S24P to form a stack or a ring?In this case, how many IE could I put in the same ring?In the IE-5000 series I see that there are MASTER and CLIENT licenses for this function, but I do not see them in them IE-4010
When configured in a network bus topology, experiencing ping loss when 9 switches are connected. Is it likely a switch bandwidth issue? 9 units of C1000 equipment in a bus topology structure..
Recently started as new IT support and right away found out that two of these switches randomly reboot every few days (5-12 Days). enabled flash logging and shows no reason for the reboot and the time and date resets.
In a mixed 9300L/9300LM stack, is Stack-T3A cable compatible with C9300L-STACK-KIT connector? Conversely, is Stack-T3 cable compatible with C9300L-STACK-KIT2 connector?
Hello Experts,Apologies for the straightforward question. I'm curious about the distinctions between a span port and broadcast packets.Let's consider a scenario where we have a switch with multiple source links connected to it, and a single link conn...
Bonjour Sur mon switch CISCO SG250-18 je peux configurer tous les port avec un VLAN particulier (Trunk ou Access) sauf le port 12? Comme le montre l'image ci dessus je ne reussi pas a avoir un 40U dans l'Operational VLAN Une idee ? Merci
