Cisco 2960X-24TD-L support for 1 SFP and 1 SFP+ port

[Steven Foo]

We would like to replace our old 2960g-8tc-l (with SFP uplink) with 2960X-24TD-L with 2 SFP+ port. 1) Could  2960X-24TD-L  (2 SFP+ port) run with the configuration of : - 1 - SFP+, 10GBASE-LR transceiver module, - 1 - SFP, GLC-LH-SM transceiver module ? We would like to replace 1 of the transceiver module with SFP GLC-LH-SM. 2) Or do we need the 2960S model to support the above configuration ? The want to have 1 uplink port connect with our existing 1G network and another to Cisco SG350X which serve 10G network. Any feedback is greatly appreciated.

[Leo Laohoo]

1) Could  2960X-24TD-L  (2 SFP+ port) run with the configuration of :

- 1 - SFP+, 10GBASE-LR transceiver module,
- 1 - SFP, GLC-LH-SM transceiver module ?

This will work. 

[Steven Foo]

Hi Leo,

Thank you.

What we wanted to achieve is the below

existing 3750G - 1G uplink connect to the new 2960X-24TD-L - 1G uplink (1st port), 2960X-24TD-L - 10G uplink (2nd port) connect to Cisco SG350X (1st port).

This will work right?  Thanks.

[Leo Laohoo]

I'm not familiar with the Cisco SG350X, but if this switch supports SFP+ then, yes.  It'll work.

[Steven Foo]

Hi Leo,

Thanks. SG350XG-24F 24-Port support 10G SFP+