Copp & Coppr on ISR 4331

[clark white]

Dears,

I want to apply copp and coppr on my router, I know the commands and the way to apply but I don't know what should be classified for the copp and coppr, in other words what I shld analyze so that I can called those stuff in class-map  for copp and coppr

thanks

[Reza Sharifi]

Hi,

Here is a sample config you maybe able to use.

https://skminhaj.wordpress.com/2016/02/16/copp-control-plane-policing/

HTH

[clark white]

Dear Reza,

Any configuration example for CoPPr , Any blog or post in which it makes easy understand to configure and apply coppr for the routers.

thanks

[Reza Sharifi]

Hi,

I have never heard of coppr and not sure what that is.

[clark white]

Dear Reza,

Here is the link which says about cPPr

http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t4/htcpp.html#wp1096911

[clark white]

Dears

I dont get any control-plane host or transit or cef-exceptional command in 4331 IOS xe router

-CPE01(config)#control-plane ?
  <cr>

CPE01(config)#control-plane ?

[Reza Sharifi]

Hi,

You you need to enter the control-plane mode first. Than under control-plane you will see the option for service-policy.

HTH

[clark white]

Dear Reza,

i can see the service policy but if i want to enter to control-plane host sub interface instead of other sub-interface for example transit, cef-exception so how i can do that i dont get such options to do that.

Pls refer to the link below

http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t4/htcpp.html#wp1082734

[glbngl.91]

Hi all,

do you have any update regarding the topic? I have the same problem on a 4331, I even tried to activate the securityk9 license (EvalRightToUse) but it seems it doesn't support control plane subinterfaces configuration...

Thanks in advance!