01-17-2024 09:51 PM
Hello,
I have Cisco Switch C9200L-24T-4G. I have configure this new switch using classic day 0 wizard.
After finish, reboot the switch but unable to access web UI using new IP address. Configuration summary attached in the picture.
How to fix this issue?
Thanks.
01-17-2024 10:25 PM - edited 01-17-2024 10:29 PM
Hello @pantulu
Does ip http server command is configured ?
Through CLI configure this:
switch(config)# ip http server switch(config)# ip http secure-server switch(config)# ip http authentication local
01-17-2024 10:33 PM
Did you change the PC IP to match new subnet of mgmt ?
MHM
01-18-2024 12:10 AM
I have change PC IP match with the new IP of switch. Still unable to open web ui.
01-18-2024 01:12 AM
Can you ping the switch from your PC ?
01-18-2024 12:27 AM
The configuration in the Management port - is the PC connected back to back on MGMT port ? (not the switch ports)
If you have not configured VLAN 1 IP address - Your switch port you connected to PC may not work.
You have console cable - connect the console cable and check is the configuration saved - and follow below video easy.
https://www.youtube.com/watch?v=lTb3Nbzhpjw
Also check Zero days :
https://video.cisco.com/detail/video/5988297857001
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide