Traceroute / HSRP / VRF

[metzgersimon]

Hello,

when i make a traceroute on an ASR 1001 router to 172.23.30.7 I get the following output:

VRF info: (vrf in name/id, vrf out name/id)

  1 192.168.99.192 0 msec

    192.168.99.191 1 msec

    192.168.99.192 0 msec

  2 172.23.30.243 1 msec 1 msec 1 msec

  3 172.23.30.7 1 msec 1 msec 1 msec

Is there a loop between 192.168.99.191 and .192 (this are two routers with hsrp .190) or is this normal behaviour when using traceroute on an asr 1001?

Greetings,

Simon

[Reza Sharifi]

Hi,

That is not a normal behavior.  Is HSRP configured correctly?

Can you post the HSRP configs from both routers?

HTH

[metzgersimon]

Router1:

interface GigabitEthernet0/1

ip address 192.168.99.192 255.255.255.0

no ip redirects

no ip proxy-arp

standby 20 ip 192.168.99.190

standby 20 priority 140

standby 20 preempt

standby 20 authentication v21

Router2:

interface GigabitEthernet0/1

ip address 192.168.99.191 255.255.255.0

no ip redirects

no ip proxy-arp

standby 20 ip 192.168.99.190

standby 20 priority 120

standby 20 preempt

standby 20 authentication v21

no ip route-cache