The RTMT > Phone Summary shows many "failed registration attempts" for a specific CUCM node. How can I find which registration attempts are failing?I've tried some tools such as Collaboration Analyzer and TranslatorX but could not filter them.
Forum Posts
We're currently in the process of implementing SD-WAN at our branch locations. Each location will have 3 transports, MPLS, internet and LTE. Our ISRs (which are nearing end of life) SRST configure to route to one or two POTS lines connected to FXO po...
- I have a pattern 1636.- The Calling Party Transform Mask has a configured value- The Called Party Tranform Mask has a configured value which is displayed to the Called PartyI would like to block the Called Party from seeing the configured Called Pa...
Hi,I´ve a ISR 2921 with CME 12.0.I moved now the outside connection from ISDN to a SIP connection.If I now call an outside phone, you can talk exact 7 seconds, after that the internal phone lookslike you hook up and the external phone is still connec...
We are trying for a conference call internally. As soon as we add 3rd user for a conference , call drops.Issue is with jabber as well as ip phone as well. We have checked below :1. Each device has been assigned with MRGL.2. MRG has the conference med...
Resolved! BCHASSIS - CUCM
We have a cisco b200 with multiple esxi hosts on it. We were installing a centos-7 running on esxi 6.7 host and working on the command line of the VM creating a folder and was kicked out and it return the esxi vmware login window. Now we are no lon...
Resolved! Unity - System Distribution Question
Hi, I received a request to have a user voicemail messages forward to several managers. I created a system distribution list in Unity 14 and applied to the user relay actions. The managers are receiving the voicemail attachment in their Outlook but ...
We have 2 BE7M-M5-K9 servers and 2 VMW-VS6-FND-K9 embedded licenses attached with the server.Recently our back to back support with cisco got expired and now we are working with the contract renewal. But we are facing a challenge during that process....
Hello, friends.I have a situation like this: I have my own physical server with a configured UCM (latest version) + Expressway 14.2.7, MRA mode enabled, and the push service activated. Phones (Jabber) are connected to it. I receive calls and messages...
I want to forward a company number to the cellphone of an external worker, with no physical phone in the company. Because there is no phone device, I can't set the external phone number mask and I need to use a Calling Party Transformation Pattern. I...
Hi Experts, May I know about the MPP (Cisco Multi Platform Phone license) from you. We have CUCM using customers with 7841 phones (500 qtys). They would like to use these MPP license instead of FLEX A and use these MPP license for Third Party IP PB...
I have an issue with our recording setup. I have created the recording profile and secure sip trunk to our cube. When I make a call, I see the call coming in, but the call is not sent to the recorder. When I do 'debug voice dialpeer all' I see that ...
Resolved! Restarting the TFTP server
Is there any way to restart the TFTP server from an API call on the CUCM?
Hello All, CallManager: 10.5(2) After upgrading our CUCM servers from 8.6 to 10.5 the active partition's disk usage has been hovering just shy of 90%. I thought I remember there being a way to lower the amount of usage on the partition, by possibly...
Resolved! Webex Calling - Import Cert
Hello all, I have a problem when I try to import a cert with the command:crypto pki trustpool import clean url https://www.cisco.com/security/pki/trs/ios_core.p7bI tried used this command on a virtual Cisco CSR100V Cisco IOS Software [Gibraltar], Vir...
