We have remote users which connect through vpn . Their Cisco 7942 Phones reset themselfs atleat twice in a day. I am attaching some phones logs it showing me tcp timeout. It only happens to vpn user everything works fine on Lan.
Hi everyoneI have to perform a updating in a cluster with 1 publisher and 3 subscriber from 7.1 to 9.1. I would like to know some things. When I am updating the publisher. When can I start updating the subscribers? Can I update them in the same time?...
Hello,i've been trying to use WebServices with UCCX, but i'm getting the error in the attachment file.I've read some other topics about this, but couldn't figure it out.. any ideas?UCCX: 8.0.1.10000-11CUCM: 8.6.2.10000-14JAVAC: 1.6.0_35Edit: Also in ...
I have a client, whose voicemail system frequently sounds like the messges are "underwater". About once a week, they sound like this and it requires a reboot to resolve the issue (temporarily though it may be). They are running Unity Connection 8.6...
We have a UC520 and we keep getting numbers like these that will grab our FXO lines and just hang. I have to shut the port and no shut the port to clear them. any suggestions to keep these numbers from locking up the FXO lines?0x2C37F 25B8 0x87B04...
I am performing IP address change for the CUCM 8.5 Publisher and Subscriber both publisher and subscriber communicate with each otherduring the IP change. can any one tell me how to configure this in the switch.Thanks.
We have CallManager V7, and I cannot access the CCMAdmin's web interface.CallManager is still working, but I cannot the web interface.What can I do to fix this issue?Art Martinez
Hi,I have been trying to upgrade our CUE from 8.5.4 to 8.6.4, but after the upgrade it is stuck in the below stage. Any help would be much appreciated. Welcome to Cisco Service EnginePower button monitor startedSetting the system time from har...
I am trying to understand Cisco's logic of prohibiting promoting subscriber to publisher in the unlikely event of a publisher going down...Could somebody explain this to me?
Is there a single page/place in CM GUI where I can find information which states that <this> particular extension is currently logged into phone with <this> mac address? I am aware of how to get this information by looking at different places but int...
Hi, i've to migrate a CCM 4.x to a BE6000. Can i use the same procedure available for the standard CUCM?CCM 4.x -> DMA 7.1(5)Jump upgrade from 7.1(5) to 9.1(2)I suppose there are differences between the standard CUCM and the BE6000.Regards,Christian
Hello,I have one issue with Cisco jabber Version 9.2.1 I'm unable to see in meeting status availability that i made configuration from Cisco presence gateway to integrate with Microsoft exchange calender 2010 (EWS) and the exchange reachability an...
Hi, I'm running newly installed CUOM 9.0, the phone reports show all serial numbers as n/a. All the requirements from the documentation seem to be met, but CUOM can't seem to get switch, port, or serial # details. Any ideas? What should I be checki...
