Changing IP address on a PLM v11

[kevin.vines]

There is no PLM specific documentation on changing the IP address on a Prime License Manager server. 

What procedure should be used and do licenses need to be rehosted or licensed instances removed and re-added?

Thanks!

[Jitender Bhandari · Accepted solution]

Hi Kevin,

check the link below.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/plm/11_0_1/userguide/CPLM_BK_U2C0C808_00_user-guide-rel-1101/installation_1101.html

Hostname	Enter a hostname that is unique to your server. The hostname can comprise up to 32 characters and can contain alphanumeric characters and hyphens. The first character cannot be a hyphen.	Yes, you can change the entry after installation. set network hostname Note    Do not change your hostname while any tasks are running.
IP Mask	Enter the IP subnet mask of this machine.	Yes, you can change the entry after installation by using the following CLI command: set network ip eth0

Also keep below in mind.

https://supportforums.cisco.com/discussion/12331101/prime-license-manager-ip-address-change

HTH

JB

[kevin.vines]

Thanks, Jitender :)

[Jitender Bhandari]

Happy to help.

JB