CME 10.5

[Ahmed habib]

I have CME 10.5 and I added IP Phone 8841 and I want to know how many IP phones i can add to CME 10.5 

What is the command can do this ?

I tried 'show telephony-service and was 17 SCCP phone but I work with sip 

[Georgios Fotiadis]

The 8841 is loaded with SIP firmware so all relative configuration should lie under voice register global/pool/dn section. Issue show license detail cme-srst to see licensing details and show voice register global to see registration info and statistics.

[Ahmed habib]

I tried it but i can't know max ip phones I can register to cme 

cisco#show license detail cme-srst
Feature: cme-srst Period left: 8 weeks 3 days
Index: 1 Feature: cme-srst Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 12 hours 49 minutes
Transition date: Apr 11 2018 22:50:37
License Count: 30/0 (In-use/Violation)
License Priority: Low
Store Index: 7
Store Name: Built-In License Storage

[Georgios Fotiadis · Accepted solution]

Look under voice register global configuration section. There should be a max-pool command that defines the maximum-number of phones that you can configure.

[Ahmed habib]

I defined the max pool manually to be 10 

How to know the real max no of supported IP Phones ?

voice register global
mode cme
source-address 192.168.70.1 port 5060
max-dn 20
max-pool 10
load 8841 sip88xx.10-2-1-16

[Georgios Fotiadis]

That depends on the platform you run CME on. See below:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme105spc.html