CME Direct Line Configuration

[cigalahgroup]

Hello,

      I have cisco 2851 router installed with CME 8.6 which has 2 port fxo cards and single telephone line (no T1 and E1) .I need the configuration for the below scenario.

PSTN number 6523145

If some one is calling this number I should be able to receive the call to internal extension 3145

Thanks

[Chris Deren · Accepted solution]

You need to configure PLAR on the voice port. Assume your POTS line for 6523145 is connected to FXO port 0/0/0 you would have:

voice-port 0/0/0

connection plar 3145