I would like to know if it is possible to configure the memories where I have 3 sticks of 8GB and 9 of 4GB, if possible what sequence I should follow in the memory slots. Thanks.
Hello,
I am looking to take a certification which mainly puts my in the data center setting up blades and cabling. I am looking for training for the hardware and certification. I found this video on youtube and it seems like something I would be i...
Here at LDAP provider details
Bind DN:
Base DN:
port: 389 or 636enable ssh: Filter: $AMAccountName=$userid (here i m mentioned my CN name , which group i need to add , getting error here)attribute:password:confirm password: timeout : 30vendor : ms ...
Several UCS C220 M4 and C240 M5XS servers.
VMware Cisco specific iso ESXi 6.0 U3 install. No updates applied.
CAT 6 cabling
Cisco Nexus 3172TQ (two switches - primary and secondary)
Making use of both on-board10Gb adapters and on added PCIe adapters...
I am getting the following message on one of multiple B480s with 1340/1380 mezzanine cards. All blades have the same host firmware package. Downgrading/Upgrading did not help. Running version is 4.2(3a). I did not see this in the release notes.
...
Hi,
I'm having few SPs on one org
part of it are serving "team-A", and part of it serving "team-B", and also part of it belongs to the admins.
Do I have a way to give a user for team-A to access only their SP's KVM ? without be able to access to ot...
I have two RAID controllers in my C240M server - one for disk (MegaRAID Cisco 12G SAS) and one for the tape drive (HP P212). If the slot for the P212 is enabled during boot, the server goes into a reboot cycle. If I disable the slot, it boots fine, ...
Hello Experts,
We have Cisco UCS C220 (SNS-3515 bundled), we want to boot some ISO from vKVM but unfortunately in boot order, only pre-installed OS i.e Cisco ISE and network interfaces are showing. We cannot see vKVM DVD option there when goto Boot...
Hello Team,
I need your help in one of the weird issue i am facing.UCSM version running on 2.2 8c.Esxi are configured with iSCSI boot.
From iscsi initiator IP pool, one of the IP assigned to iscsi vnic (for example 1.1.1.1) as inititor but reflecting...
Does anyone know how to reset a UCS system to factory defaults? We have a UCS lab at the office and we need to be able to reset everything back to factory defaults so that multiple people can learn how to build a UCS system from the ground up.
I currently have a UCS Mini w/ two 6324 FIs in a UCS 5108 chassis.
The max speed FC ports support is 8Gb. Are there any newer FIs available for the mini that support 16Gb FC?
Hi,We have recently installed Cisco UCS devices in our environment with following devices2 x Cisco UCS Fabric Interconnect 6120XP with Expansion Module2 x Cisco UCS 5108 Chassis2 x Cisco UCS 2104XP FEX16 x Cisco UCS B 200 M2 Servers with M81KR Mezeni...
I have installed ESX on a UCS server (see versions below) ESX is installed on a Cisco Flex Flash (mirror)
When I make changes via my VShpere client (or VCenter Essentials Server) after a reboot I lose the configuration changes.
e.g. VM's that I've ad...
Hi
I am currently working on migrating my VMWare esx host running on UCS to ACI env.
I am planning to make a disjoint UCS fabric interconnect so that old vlans connect to N5Ks (traditional fabricPath) and the new vlans trunk to ACI leafs (baremetal)...
I've created a Service Profile from Template { Template type: Initial Template } and associated service profile to servers. While creating template 'LAN Connectivity Policy' was used. LAN connectivity Policy comprises of 4 vNIC and currently 4 VLANs ...
