Unified Computing System Discussions

I am using UCS Director Orchestration to automate building a VM which gets PXE booted and has some applications installed via SSH. The SSH Command Task is the last step in the workflow and was previously working. Any SSH command that I put into the "...

Hi Here I m using UCS C210 M2, got the below alertDDR3_P1_B2_ECC: Memory sensor, non-recoverable event, Upper Non-Recoverable going high (253 > 15 error) was assertedDDR3_P1_B1_ECC: Memory sensor, failure event, Upper Critical going high (253 > 10 er...

I have question about Vlans and Native Vlans.  I know the topic has been widely covered, but I can't find an answer to this question.   Before you comment please note that I am not talking about the little radio button which is present in the Vlan li...

Is the following Fibre SFP supported on the 6248 FTLF8524P2BNVThe matrix is as follows:DS-SFP-FC4G-SW DS-SFP-FC4G-LWThanks

Hi Q1 -Currently my Lan IP Pools ext-mgmt has only 4 IP remaining How can i extend the IP Pool range ? or Do i need to add a new IPv4 Pool ?Q2 - Can I create a vNIC template and use existing Vlan ID with the new template which are already a part of e...

Can anyone help on this.. In our lab we are trying to connect from FI 6120xp to Cisco 3750E Switch and inserted SFP module on FI port number 6. We created a separate port channel added couple of ports on it and assigned couple of vlan numbers. When w...

Hi, How do I clear error counters on IOM fabric ports (NI Error Counters)? Thanks in advance. Kind Regards, Andy

HI Team, We are doing an installation of UCS Bseries servers with 5108 chassis and 6296UP Fabric Interconnects. Was trying to upgrade the firmware version of all the components to 3.1(1e) from 2.2(2C). During the upgrade of the secondary FI-B after c...

Dear Sirs, I have one UCS C240-M3S Server. Because I can't open the kvm console with java, I decide to upgrade the firmware with CIMC.When I upgraded the CIMC and upload the firmware , my notebook computer crashed.The result is that UCS is very slow ...

Hi, For some reason, UCS Central is showing 7 major domain faults, all of which are like this: Firstly, this doesn't even show *which* domain the error is in, but thankfully we only have two. Logging into UCS Manager for both domains, there are *no...

Hello Experts, We have 3 UCS M4S2 servers (ordered as BE 7000 Bundle).Version: 2.0(6d)The servers have been running (without any load - just OS ESX 5.5 without VMs) for about one month without any problems.After 1 month, fans in one server started sp...

Hi all, I have a c210 with ESXI 4.x the issue is my hdd are crashing almost 1 time a month, I changed my controller and still the same issue. The bios version is  C200.1.4.3l.0. Thanks all. 287

I am getting the following dependency error when updating the driver on a esxi 5.5 host. firmware version is 2.2(5) according to the compatibility matrix, esxi 5.5 needs t be updated to 1.6.0.25 on the fnic /vmfs/volumes/548c8b67-1c427a73-66c2-002...