Unified Computing System Discussions

hello, i have two ucs c220m3 and now i have isntalled expe in one ucs and expc in one ucs.as now for expe, i created new vswitch 1 and assign 1 port from UCSC200M3 4 port network card but it is not pingable from DMZ switch.as port is showing connecte...

Hi,We have recently updated to Version 1.3(1a) of Ucs Central.  The new interface worked a few times now if we either try to switch from the login prompt even if already login we get this message:java.net.ConnectException: Connection refusedthis shou...

Hi,We've recently updated our UCS to the latest release, which finally adds support for VM-FEX for 2012 R2.  However, the supposed official method to manage VM-FEX for Hyper-V is using the UCSM Provider in Microsoft VMM 2012 R2.Has anyone been able t...

I have B200M3s with only 1240VIC. No additional mezzanine card. So I get 40GB throughput (20 to fab A) (20 to fab b) but on my 2208XP I only have 2 uplinks going to the FI. So thats 20GB per IOM Tops. Do I need to add more links between my IOM and FI...

What is the procedure to factory reset or recover aadmin password on a c3124 appliance

We have migrated NLB cluster from HP Servers to UCS Servers, and since migration to the Cisco UCS environment, customer have been complaining about issues with the NLB (Network Load Balancing) service on their systems.  These machines were previously...

Hello,i am having setup of below devices:2 FI 62482 UCS Chassis4 B200M35 B200M4now as i have discovered my chassis i created one service profiel from existing service profile and assign to B200M4 server but it is showing vNIC down as show in attached...

I have a 2911 where I installed this single wide UCS E blade.does anybody have any configuration for the router as it relates to the blade?i have installed the VMware on it already and able to put an ip on it so I can browse to the CIMC but not to th...

HelloI'm facing issue with FCoE ..I'm using Fi-6248 UP nexus 5548UP from 5k to Fi it is running with vpc and I have created two iseland SAN-A and SAN-B .SAN-A is connected between 5548Up and FI-6248Up as well as SAN-B is connected between others two ...

Hi All, I have a customer who  has the while kit for UCSM mini and another pair of Fabric interconnect 6248 , He would like to manage both through only on pair of glass which in this case is UCSM version 2.2(x) , is this possible ?  Saleem

Hello All,I have a requirement to host Windows server in a Cisco UCS B-series blade with VIC 1240 installed. While creating vNICs, by default, operational speed is set to line rate which provide 10 Gbps speed. However, I would like to setup 1 Gbps sp...

Hello UCS Community,   is there a way to script the backps of UCS configs that are normally done from the Admin tab of the UCS Manager GUI? Thanks...

Hi community,Here i configure in UCS booting from SAN,We created 2 vHBA-1 and vHBA-2In vHBA-1(PRI)Primary SAN traget-xx.xx.xx.xx.xx.xxSecondary SAN target-xx.xx.xx.xx.xx.xxIn vHBA-2(SEC) Primary SAN traget-xx.xx.xx.xx.xx.xxSecondary SAN target-xx.xx....

Hello, since i upgrade my central in 1.3(1a) I have a pb on clock of UCS Central, not for clock in domain definition.In GUI I defined TimeZone "Europ/Paris" in "Administration", "General" (old GUI). But this GUI and CLI show a PDT clock not CEST as b...

Hi, We lost one of our FI part of the cluster environment and new FI is being shipped. What is the procedure I should be following to add the new FI to the environment? My understanding:1. Power ON the new FI, IP it and verify the version.2. Perform ...