Unified Computing System Discussions

Hi,we would like to test a 785 GB Fusion IO Card for our UCS Blades. But we get the error message "Flash Life on Server yy flashStatus: Loading Drivers... I don´t know what driver is missing. Because there is still one available. Maybe someone could ...

Hi All I wanna know when I use the FI modes and which devices connected to the FI in each mode:1- Ethernet end host mode or EHV2- Ethernet Switching mode3- FC end host mode or NPV 4- FC switching mode Thanks in advance

Hi ,One of my customer is looking for blade failover so that the service profile & OS will be moved onto the blade seeamlessly without any manual intervention. I tried my best & Created the server pool of four blades &  service profile  for the same....

HiWhen I configured service profile to a blade then deploy ESXi, It works correctly for a time then I found the following error " VIF 716 link state is down" as in the attached and the server management IP is pingable also the ESXi IP is pingable dur...

Hello everybodyI have the following architecture1 Cisco Catalyst 6509-E1 Cisco Catalyst 3560-x2 Fabric Interconnect 6296UP1 FAS 3220 (principal storage)1 FAS2240 (vault backup)1 chasis cisco UCS 51085 blade servers Cisco UCS B200M3Firmware version: 2...

I have UCS 5108 Blade Server Chassis (with two B200 M3 Blade Servers inside and two FI 6324) connected to Nexus N5k switch through 4x10GE links.I want to configure the two aggregated channels FCoE (vFC) from chassi to switch.All instructions I've bee...

Hello all I'm face with a problem of upgrading my vmware environment. Is it possible to upgrade my current vmware environment from vSphere 5.0 to  vSphere 5.5 or v6 ?? Below is my current Cisco UCS specs. Cisco says no Vmware says yes.  Has anyone tr...

Hi All I need to Know the definition and the USAGE (when I use each port)  and the protocol used foreach of the FI port types1- FC uplink port2- FC storage port3- FCoE uplink port4- FCoE storage port5- Appliance portthanks in AdvanceAmr