my nexus 1000v vsm is at 100%. any idea what would be causing this?
my nexus 1000v vsm is at 100%. any idea what would be causing this?
Cisco USC B200 M3 servers with LOM 1240 / 1280 installed. USC Manager v 2.1(1a). vCenter & ESXi 5.1.I want to create VM-FEX connections for ESXi virtual machines. I'm following a manual on Cisco web site. I'm stuck at Chapter 5: Connecting Cisco UCS ...
I am about to setup an exchange 2013 service profile. Anyone have any experience with this? How many nics does it need?
I have 4 C240 M3 servers being managed by 6248's running UCSM 2.2.2c and they are visible and working. I am going to boot ESX 5.5 from the flexflash SD cards...I read that is supported... I have a raid controller in the server and 1 flash hard drive ...
On my UCS blades I'm running solely ESXi 5.1 and nothing else. I have 1000v's setup for each cluster. Every blade is a B200 M3 with the VIC 1240 card. Currently I just have every server setup with 2 interfaces, 1 for A, 1 for B. Recently after ha...
Hello, Is it possible to restrict specific KVM sessions for certain users in UCSM? Let's say I have 4 blades dedicated for Linux systems, and 4 blades for VMware systems. I would like to allow KVM access to Linux blades only to Linux admins, and to V...
Running UCS Director to manage converged infrastructure including EMC VMAX, can I configure SRDF replication from the UCS Director UI? Are there workflows to do that? Can I accomplish this indirectly using scripts? Can I view the VMAX SRDF configurat...
when i boot my b200 m3 blade from a virtual cdrom, it is very slow and eventually fails. THe iso is on the same network so it should not be slow. I tried another iso and same thing. slow and then eventually fails any idea?
i am building a windows 2012 server (not hyper V) on ucs. How should i setup the NICS? there will be more than one nic but one will be active only. how should i setup the vnics?
UI forgot our FI password, is there a quick way to reset that?
After installing Windows server 2008R2 on c240 ,there are many base system device under the Windows Device Manager with yellow bang .I think should be lack of some drives, but i don't know what the lack of drives.I should how to find what drives for ...
Hy everyone im having problems installing a Windows Server 2008 in a C240-M3 standalone rack server, the server has a megaraid controller and 4 ddisks i think i have made the raid array with the web application of the mega raid controller software bu...
I'm looking for some out of the box thinking here. Here's the setup:vSphere 5.1 Cluster4 x B200M2 in Chassis A4 x B200M2 in Chassis BChassis A has 2104XP IOM and does not use port-channeled connectivity.Chassis B has 2208XP IOM and DOES use port-chan...
Partner would like to know the following:Well, it's not clear till what extent are the monitoring capabilities same, bit better, or far better than in UCS Manager.I just need to know whether UCS Central is able to provide a graph of the BW consumptio...
Hi, We are doing UAT testing for our newly installed 6248 FI's with following details and we are observing some unusual behavior FI-A - 172.10.15.51 (Primary)FI-B - 172.10.15.52 (Secondary)Cluster IP - 172.10.15.50 If we are shutting down the FI-A (P...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 05:23 PM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |