Unified Computing System Discussions

Hello,I 'm trying to use UCS simulator on my VMware workstation 7.1 The VA (virtual appliance) starts up fine and i can login with the given username and password and get the confiugration options. But when i try to connect to the simulator via GUI i...

I am very new to the UCS environment and have to get up to speed fairly quickly. I have decided to start with the Blade chassis. But have a few questions.  I am hoping someone can clarify how serverside ports are assigned to uplink ports withing a 22...

Hi All,We just picked up a couple  ucs240 m3 servers and need to install esxi. We have no physical drives in the servers. The var we purchased from has two techs with differing points of view on the location of the install. Their arguments are as fol...

UCS C220 M3S with PCI mezzanine card raid SAS 2008M-8i We just got a new server wiith this controller, when try to configure it with the four (04) SAS drives to a Raid 10...OOHH no RAID 10 was able to choose.I found a paper that says  that the contro...

I have followed the steps as outlined by Cisco in the UCS Centrel Upgrade and Installation guide:Step 1   If necessary, reboot the VM and change the boot options to boot from CD ROM.Step 2   Mount the Cisco UCS Central ISO image with the virtual CD/D...

Hi there,Running a Cisco UCS C-200, I noticed the cache size reports as 349 MB but I was under the impression that it should be 512 MBThis normal?

We have IOM-2008XP, and 2 old blades B200M3 detected 8 uplinks (40G).  We just added 4 new blades aB200M3 nd used the same service profile as the 2 old blades.  However, the new blades only detected 4 uplinks (20G).  Anything I missed to make the 4 n...

Hello,I have a UCS C220 M3S running BIOS 1.5.1g and CIMC fireware 1.5(1l).There is a LSI MegaRAID SAS 9266-8i(Fireware 23.9.0-0023)controller with TMM-C Super-Cap inside.CIMC appear that overall storage status：severe fault and the controller informat...