creating port-profile on n1kv but not showing in vcenter

[Dragomir]

I recently upgraded my vsm to 5.2(1)SV3(1.4)

and also upgraded all vems

show module shows all vems are online

also show svs connections shows vcenter is connected.

but when I create a new port-profile on the n1kv, ITs not syncing up with vcenter

any idea why?

[Keny Perez]

post the the running config of the port-profile here...

-Kenny

[Dragomir]

hi

here is the running config on the port-profile

switch# sh run port-profile UCSTEST-n1kv-vm-vlan160

!Command: show running-config port-profile UCSTEST-n1kv-vm-vlan160
!Time: Thu May 28 15:39:39 2015

version 5.2(1)SV3(1.4)
port-profile type vethernet UCSTEST-n1kv-vm-vlan160
  switchport mode access
  switchport access vlan 160
  no shutdown
  state enabled

[Keny Perez · Accepted solution]

you are missing the "vmware port-group" command.

-Kenny

[Dragomir]

Thank you. Yes i was. 

[Dragomir]

I think i figured out what the problem is

I forgot to add

vmware port-group

into the config

[Keny Perez]

Please mark the question as answered for future users facing the same issue.

-Kenny

[Walter Dey]

Voila ! explains all !

[Walter Dey]

Did you try to restart VSM ?