Hi experts,
I installed two P81E VIC into my C210 M2 server. One at PCIe slot1 and the other one at slot4. I need to set it up for SAN boot with VIC card in slot4, but from CIMC I can only see VIC card at slot1, although I can see the other one at "PCI adapters" tab. By ssh to CIMC:
ucs-c2xx-m2# scope chassis
ucs-c2xx-m2 /chassis # show adapter
PCI Slot Product Name Serial Number Product ID Vendor
-------- -------------- -------------- -------------- --------------------
1 UCS VIC P81E QCI1612A92F N2XX-ACPCI01 Cisco Systems Inc
ucs-c2xx-m2 /chassis # show pci
pci-adapter pciadapter-pid
ucs-c2xx-m2 /chassis # show pci-adapter
Slot Vendor ID Device ID SubVendor ID SubDevice ID Product Name
---------- ---------- ---------- ------------- ------------- -------------------------
1 0x1137 0x0042 0x1137 0x0047 UCS VIC P81E 10 Gbps 2...
2 0x8086 0x10e8 0x8086 0xa02c Intel E1G44ET 1 Gbps 4...
3 0x1077 0x2532 0x1077 0x015d Qlogic QLE256x 8 Gbps ...
4 0x1137 0x0042 0x1137 0x0047 UCS VIC P81E 10 Gbps 2...
5 0x1000 0x0079 0x1000 0x9260 LSI 9260-4i MegaRAID S...
ucs-c2xx-m2 /chassis # scope
adapter Cisco Systems UCS P81E Virtual Interface Card
dimm-summary Information common to all DIMMs
storageadapter RAID Controller
ucs-c2xx-m2 /chassis # scope adapter 4
Error: Managed object does not exist, use show command to list valid targets
How can I go to PCI slot4 and change the settings?
I am using fw version 1.4(3c).
Appreciate any pointers.
