UCS c240 SNMP Monitoring

[jamesrww1]

Hi,

I have some C240 servers running in a remote data center. I have configured SNMP and would like to monitor hardware (HDD,PSU,FAN's,ect) and overall server status. I am struggling to find the correct SNMP OID's to monitor. Has anyone configured SNMP monitoring and if so what SNMP OID's are being used ?

Thanks

[Walter Dey]

Do you know

Cisco Integrated Management Controller (IMC) Supervisor

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/Cisco-IMC-Sup/mgmt-guide/1-1/b_Cisco_IMC_Supervisor_Mgmt_Guide_1_1.html

[jamesrww1]

Hi,

Thanks for that, I have the SNMP configured and working but I am trying to workout which OID's i need configure my monitoring software with to check for hardware faults.

James

[Walter Dey]

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/mib/c-series/b_UCS_Standalone_C-Series_MIBRef/b_UCS_Standalone_C-Series_MIBRef_chapter_01.html

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/mib/b-series/b_UCS_MIBRef/b_UCS_MIBRef_chapter_0100.html

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.719

https://supportforums.cisco.com/discussion/11456356/snmp-traps-and-monitoring-ucs