03-07-2019 03:26 AM - edited 03-10-2019 11:33 AM
Hi,
I'm just preparing for a UCS troubleshooting certification, where the Redwood and Woodside commands are good to know for troubleshooting IOM-FEX. Little bit hard to study for it, because you have to use physical equip. UCSPE is not supporting the hardware command set.
So far I found out that:
Redwood commands apply to IOM-FEX 21xx series
Woodside commands apply to IOM-FEX 22xx series
Tiburon commands apply to IOM-FEX 23xx series.
In fact I just have a FI 6332 on hand, I cannot verify the command set for the 4th FI Generation.
Which one is used for IOM-FEX 24xx series?
The latest troubleshooting guide was last time updated on November 2017.
Since then lot of new equipment was released.
Is there anyone with a FI-6454, who can run the commands via SSH on his UCSM:
Example output from my FIs:
If you run the [..] sts command on this set of hardware (FI 6332 + IOM 2304) for the redwood commands.
fex-1# show platform software redwood sts
Stub Library libredwood_cli.so could not be opened
*** libredwood_cli.so: cannot open shared object file: No such file or directory ***
fex-1# show platform software woodside sts
^
% Invalid command at '^' marker.
fex-1# show platform software woodside ?
chmtech Show tech-support-callhome information
tech Show tech-support information
fex-1# show platform software tiburon sts
Board Status Overview:
legend:
' '= no-connect
X = Failed
- = Disabled
: = Dn
| = Up
. = SFP waiting for t_start_up timer expiration
i = SFP waiting for prom info read
c = SFP waiting for t_start_up_cooled timer expiration
* = SFP present
[X] = SFP validation failed
------------------------------
* * * * * * * * <- QSFPs
+-----------------------------------------------------------------------------------------------+
- - - - - - - - : : : : : : : : | : : : | : : :
+-----------------------------------------------------------------------------------------------+
|0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23|
|I |
|N |
| Tiburon |
| Asic: 0 |
|H |
|I |
|0 1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4|
| 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7|
+-----------------------------------------------------------------------------------------------+
| : : : - - - - | : : : - - - - | : : : - - - - | : : : - - - - - - - - - - - - - - - - - - - -
3 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 9 8 7 6 5 4 3 2 1
2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
\_\_/_/ \_\_/_/ \_\_/_/ \_\_/_/ \_\_/_/ \_\_/_/ \_\_/_/ \_\_/_/ (r = retimer lane configured)
blade8 blade7 blade6 blade5 blade4 blade3 blade2 blade1
fex-1# show platform software portola sts
^
% Invalid command at '^' marker.
fex-1# show platform software portola tech
Stub Library libredwood_cli.so could not be opened
*** libredwood_cli.so: cannot open shared object file: No such file or directory ***
Also noticed the portola command.
Is this command used for Nexus 20xx switches?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide