I faced a placement issue on brief:
- Hardware: UCSB-B420-M4, UCS-SP-FI48, Cisco UCS VIC 1380 mezzanine, Cisco UCS VIC 1340 modular LOM, Cisco UCS Port Expander Card (mezz) with UCSM 3.2.1d (infrastructure and servers) adtapters showing as adpter 1 and adapter 3
- I have create below vmnics from 00 to 05 are mapped to vCon1 then FI-A and from 06 to 11 are mapped to vCon3 then FI-B
vmnic00_esxi_A
vmnic01_vmotion_A
vmnic02_FT_A
vmnic03_NSX_A
vmnic04_Prod_A
vmnic05_Backup_A
vmnic06_esxi_B
vmnic07_vmotion_B
vmnic08_FT_B
vmnic09_NSX_B
vmnic10_Prod_B
vmnic11_Backup_B
I put all these vNICs in LAN Connectivity Policy in same order, then in SP template I did vNIC/vHBA placement manually along with admin host port as below
vCon1
vmnic00_esxi_A 1
vmnic01_vmotion_A 1
vmnic02_FT_A 1
vmnic03_NSX_A 1
vmnic04_Prod_A 1
vmnic05_Backup_A 1
vHBA_A 2
vCon3
vmnic06_esxi_B 1
vmnic07_vmotion_B 1
vmnic08_FT_B 1
vmnic09_NSX_B 1
vmnic10_Prod_B 1
vmnic11_Backup_B 1
vHBA_B 2
Still showing from ESXI (Vmware-ESXi-6.5.0-5969303-Custom-Cisco-6.5.1.1) not in order but at least now when i did admin host port setting it bring all vNICs in vCon3 first but not ordered then all vNics in vCon1 but not ordered also I ried reinstalling the ESCXI after editing and same result.