About 15% of the calls that my UC540 transfers to my cell phone via SNR have little to no volume. Has anyone else experienced this? What can I do about this? It is really annoying and isn't good for business.
My partner continues to have VPN issue to the CUE via a browser or pinging the CUE address. As a remote user they can gain access to their internal network, they can surf the Internet (split tunnel) but they cannot get to CUE. This worked fine on...
I loaded a company logo into the UC500 flash & got it to show up on a 7945 display but it did not look good. I went back & revised the .png. Then I copied it to the UC500's flash, overwriting the original image. But now I can't get the new image to s...
UC560 Decibel LevelCan anyone comment on what the decibel level of the UC560-T1E1-K9 is?This info was not found in the data sheet.My customer has a network closet close to their office and wants to know specifically how loud this equipment will be.
Hi all I need some guideance,I have a SIP trunk, where the server it is registering to was recently changed at the provider site. I'm not sure where the problem occurs. I'm registering and recieving a 200 ok message. I can make inbound outbound calls...
HiI want to know if I can upload 7985 phone load to a UC520 (CME 8.0) ? because in the UC520-8.0.2.zip is not available.And if it is possible, were can i download the .zip for 7985?thanks & regards.Antonio.
ACD & Live AttendantCan someone assist with how the following can be accomplished with a UC560?End user would like all calls to their main number to be answered by a Live Attendant using a SPA-525G and CallConnector Operator to route calls to parties...
Hi team,A customer of mine wants to connect an analog door intercom as an analog extension on the UC540.He wants all internal extensions to ring when the door-bell is pressed (easy - analog extension dials to a blast-group) but he wants the extension...
Hi All,Looking for help or suggestions regarding an issue i am encountering with UCC/UCC server, I am continually hitting brick walls and even running into support issue with TAC, most of then sadly seem to be just as baffled as me with the issue I s...
Hi1 SPA90003 SPA9421 WIP310Call pickup does not work.If you try to do a call pickup the phone displays "gathering call info" and nothing happens.Any quick setting that must be on or off somewhere for this to work ?Thanks
I upgraded my 7975G phones to 9.0x and my 7925G's to 1.3.4 and I can no longer browse thier respective web pages.At least I think that is what caused it.Any idea why?
Is it possible to create pstn trunk groups and use them to specify what extensions call out which fxo ports?example: extension range 100 places an outbound call which uses any of the ports 0/1/0 - 0/1/3 extension range 200 places an ou...
Hi all,I am getting an error that say's I need to close CCA but it's not open.I can reboot and have nothing running and I still get this error. I have also tried reloading my UC520 and still no go.Any thoughts on this?Win 7 x64 is my computer platfor...
I use two phones - a 7975G x100 at my desk, and a 7925G x 104 while I am roaming the office.I have the 7925G setup so I can MONITOR x100 and accept incoming calls.However I had to delcare a neame, username and password for the 7925G. I made up a name...
Does Cisco have other MOH files available for the UC500?I don't want to use audacity or become knowledgable in MOH files...but my customers always ask if Cisco has other files than the piano one.Anywhere I should send them if they want to download th...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: