Hi ExpertsHave setup Site to Site VPN with Oracle Cloud from onpremise Cisco ASA. Now Oracle provides, 2 public peer IP address as failover mechanism. So i want to setup another standby-site to site vpn with Oracle cloud using same ASA Outside interf...
Forum Posts
Hi, everyone! Good day! I'm looking for a solution which has an ability to enable always-on and SSO with Azure-AD at the same time on iOS device. Does AnyConnect support that? if not, does anyone know a good solution? Thanks!
Hi Experts,Trying to setup Site to Site VPN from Onpremise ASA to Orace Cloud. As per the Oracle consultants, configuration is already done on the Oracle Cloud end. I have done the configuration on onpremise ASA as well, with ASA Site to Site VPN "si...
Resolved! AnyConnect Premium license
Dear All, Please, we need your assistance, we have Cisco ASA 5516-X with FirePower. The device came with 4 AnyConnect Premium Peers perpetual license but there is no AnyConnect Application pre-deployed on the device. We contacted our supplier for the...
Hello, We want to refresh old hardware, and we have and A/S ASA with a total of 50 Anyconnect Premium Peers:Failover cluster licensed features for this platform:Maximum Physical Interfaces : Unlimited perpetual ... ... AnyConnect Premium Peers : 50 p...
Hardware is ASA 5510, ASA 9.1 (7) 25 I have a user who connects to our network using anyconnect then RDP's to his machine to carry out out of hours tasks. Usually this works fine but for the last couple of days he has reported that he can connect us...
Hi, My problm : - I have a HUB configured with a transform-set mode tunnel - A spoke behind NAT device. how could i integrate the spoke into the dmvpn ? # without changing the HUB configuration
I was wondering if there is a way of getting a report of my history of VPN log ins- with time/ hrs used over the last month/months/ year? This is something I would like to find to show extra hours worked from home for discussion with managers etc. I ...
Hello Everyone! I'm attempting to configure SSLVPN without split tunneling. VPN network - 10.10.22.0/24 (10.10.22.5-250) is the pool. I'd like to tunnel ALL traffic, private or public, through the tunnel, allow users to access 10.10.20.0/24(Corp LAN)...
Hi everyone I'm having issues configuring a site to site VPN between ASA and Checkpoint device. At this point, we have check that interesting traffic, encryption and hashing algorithms are ok. When we originate traffic from the network attached to AS...
Dear colleagues,I'm trying to connect Cisco IOS device (800/15.6M or CSR1kv/XE16.12) to Strongswan using FlexVPN model. It connects and I see traffic (e.g. pings between Cisco and remote side) but Cisco (both mentioned above versions of software) gen...
Hi, i get the below remote desktop connection error message when trying to access the client desktop.Anyconnect status is connected.Could you please suggest how to fix this ?My teammates use the same application and are connected to RDP.
Hi, I have a problm with my DMVPN architecture : - The HUBs are config with transform-set mode tunnel.- Spokes behinde NAT device.DMVPNHow can I fix this problem without changing the hub configuration? Thanks !
I have a site-to-site VPN between two RV340 routers. The VPN connects and is functional for all purposes.However, given time, generally the better part of a day, the service degrades. Users cannot access resource across the VPN. Ping does not work on...
HI friends We have Purchased HMA VPN for Proxy access. In HMA VPN support they have mentioned that HMA can be configured in dd-wrt supported Router. but in our company, we are using a Cisco 2900 series Router, so is there any possibility to configure...
