VPN

Hello All, I am trying to check how many license are being used for our vpn. a) what is the maximum count for users that can use anyconnect vpn?b) what is the limit for simultaneous anyconnect users , if any?c) Does the eff limit field means maximum ...

Hello, I have configured IKEv2 between 3945 and ASA. On 3945 end I have only 1 network, but on ASA end I have 3 networks. When the VPN connection is formed, I only see 1 subnet on each end, I cannot reach other two subnets from 3945 end. Yesterday af...

Hi There I am having an issue connecting our Cisco RV320 to a Cisco 4000 series router over IPSEC VPN Both Sides have the following configsRV320PHASE1 DH: Group 5PHASE1 Encryption: AES-256PHASE1 Auth: SHA1PHASE1 SA Lifetime: 86400PHASE2 DH: Group 2PH...

I'm not terribly familiar with VPN setups, enough to be dangerous.  I have a client who is needing a VPN connected to a third party but they (the third party) are providing me with an IP address of theirs to use for Nat-ed traffic from their network ...

With GDPR and all that I want to disable Customer Experience Feedback.  I have followed the guide with creating a 'Feedback Service Profile' here and disabled Customer Service Feedback Service and disabled Include Crash Report and applied it to the A...

Hello,I need to use the Cisco VPN client feature of keeping an established VPN alive even when another Windows user logs on. I tried to set a profile.xml setting "RetainVpnLogOff", but didn't work; I also tried to set "AlwaysOn" but maybe I didn't se...

 1- We have a site-to-site tunnel between two Cisco ASA’s, on the main side we have setup a ISP fail-over. In normal mode everything works fine. In fail-over mode everything works automatically except 1 VPN site to site tunnel.  2- Checked the config...

I have Verizon Wireless data on this Chromebook and I'm trying to use Cisco AnyConnect to connect to my work's VPN. It grabs the connection for less than 5 seconds every single time, then it gives me this, "Paused (no network)" message. Does anyone h...

Hi Everyone, Can anyone let me know that "Can I authorize user to connect anyconnect client Vpn where ASA checks Users machine registry value/Key using Hotscan features or ISE. Below is my scenerio. Setting up a lab where my user authenticate using 2...

Hello,I'm looking to use both certificate authentication at asa level and authorization on ISE.Anyconnect is able to send both certificate to ASA.but i'm not able to Send both certificate from asa to ISE, is that possible?Someone already try this ? i...

The devs have stood up a Sentinel Licensing Server for LANSA programming licensing.  My understanding of the server is that the LANSA software will check about every 15 minutes to validate the license over udp 5093.  This works from within any subnet...

I have new ASA and I want to import SSL certificate for anyconnect user. I have .pfx file and only o have CLI access of ASA