Hello I have two Anyconnect VPN concentrators in two data centers. Both the Concentrators are in Active/Active State. Now if a machine is trying to connect to these concentrators, I want to know how the application chooses which concentrator to con...
Forum Posts
Background: We have some mobile tablets with LTE and wifi cababilities. They use AnyConenct to access an internal server to run dispatch software. The dispatch software requires that the tablets always communicate to the server using the same ip addr...
How do you add text to anyconnect client this this photo?
Hi, I am using Cisco AWS router with version 15.4. I have set up a Remote access VPN and its working fine with split tunneling but if I set up a VPN to tunnel all the traffic (Including Internet) its not working means I am not able to access internet...
I have configured remote access VPNs for AnyConnect using the FMC. It was easy to apply an extended ACL as a VPN filter as the option is simply a drop-down. So how do I accomplish the same thing with a site-to-site VPN tunnel? Do I simply add the ...
Hello All I have a user who is facing this when using any connect on a mac I have tried uninstalling then reinstalling but the same thing occurs again. Something somewhere needs to be configured, has anyone seen this before on a mac ? Thank you for ...
Resolved! Site-to-Site VPN stuck at MM_WAIT_MSG4
EDIT: Thanks for the help! I fixed the configuration and all has been fixed.
Hello All, We are using Cisco AnyConnect, ASA5525X for VPN access. We have a Split-Tunnel setup to route 192.168.0.0/16 and 10.0.0.0/8 over the VPN tunnel. The issue we're running into is that we still have one important file server using a 192.1...
What are crypto map sequence numbers for? What is their purpose and reason for being?
We recently purchased a security license our Cisco 2901 router. The GRE tunnel using 3des I have created using the new license is showing up/down. I’ve confirmed the tunnel has the same configuration on both ends and that it is configured like all 15...
Hello Community Team, I am using ASA 5516X manage it by ASDM on this device i have configured any-connect VPN & integrated with a microsoft radius server through NPS. I have make two VPN-Connection profiles, requirement i want to lock each prof...
Hi, We have setup Site to Site VPN and it was working fine but recently its stop working. Following scenario I observe. 1. When traffic is initiated from local to remote VPN gets up and able to access remote Server2. But when traffic is initiated fro...
We are working to deploy NAM to endpoints. During the test, we are facing issue with wireless connection when NAM authenticates against NPS. The current deployment involves both ISE and NPS as radius server at various location and customer is looking...
I tried to look around briefly and couldn't find the answer. from sho vpn-sessiondb summary: <snip> IPsec : 5000 Configured : 5000 Active : 0 Load : 0% SSL VPN : 25 Configured : 25 Active : 24 Load : 96% We have hit 25 users before - so what happens ...
Hello, as we need to make a failover Active/Standby cluster from our ASA, used as an Anyconnect users harbour, local CA is not allowed. I am basically fine as to how to generate certs for users on the Windows server, but cannot imagine, what about th...
