Hi Experts, We're planning to build IPSEC Site to Site VPN with our clients. Our Internal subnets for VPN domain is 172.16.0.0/24. In order to hide our Internal LAN , we've been asked to NAT to another Private Subnet so this can be advertised as ...
Hello, Please forgive my rather limited knowledge of Cisco devices. It all remains fairly knew to me. I've exhausted many hours on what is most likely a simple oversight somewhere on my part, so hopefully someone can enlighten me. I'm trying to...
Is it ok to change ssh cipher security level to high from medium? The high will be aes256-xxxxxx while the medium is 3des-xxxx which was considered as security issue. What will be affected if I make this change? Please advise! Thank you!
Hello, Recently, my integrator made some updates and applied some patches to our ASA 5508-K9 and we are unable to connect to the ASA for VPN anymore without using the Cisco app. We are all Mac users and we have been setting up through the Mac VPN set...
Hi All, The issue is this: We are using Anyconnect VPN to access our corporate network from internet. My office local subnet is 10.0.0.0/8. when some user connectcted from Home is inject 10.0.0.0/8 series of route to his PC. Now my question is t...
Hello, Unless I'm mistaken, when you buy an RV340, you can have 2 SSL VPN (AnyConnect) users without having to buy additional licenses. So I try to connect. Creditentials : PASS Welcome post : OK and ... I'm going to see on the RV340 side w...
Hello, I'm trying to setup a von L2TP VPN connection between a Windows 10 machine and a Cisco 2910 router. The connection can be established sometimes, but fails at other times. I've tried to find the cause of the problem by looking at the debug ...
Hi all, Currently we have a L2L IKEv1 tunnel (ASA 8.2) and we're having issue's with one-way traffic. Traffic from our side to the other side is succesfull, but the other way around is failing. We have already checked the end devices for any misconfi...
Hi All, How can I upgrade Cisco windows compliance module from 3.6 to 4.3 without user interaction ? Thanks in advance
Hey together, Situation: Site-to-Site VPN with NAT between two ASAs My SAP colleagues asked me to build a vpn to a partner of them. Private ip (server sap) - NAT (our public space) - VPN - Partner (their public range) - NAT to their local private i...
Can a 3850 switch be configured for IPSEC site-site VPN?
Hello, We have an issue on DMVPN setup on which all traffic is working normally between Hub and spokes except for some specific web application, the login to application page is working also fine and page is accessible but when trying to download som...
Hi,I have to configure a VPN tunnel site to site with IPSec and CA certificate but when I try to paste the certificate the router give me an error. I have two certificates of the other side of the IPSec tunnel. I couldn't find a howto to implement th...
Hi, Here is my situation: I need to setup a remote vpn with anyconnect to Microsoft azure cloud. to do so , I have 2 ASAv, but seen that ASAv could not be setup in High availability, i will configure them independently. My 2 ASAv have private IP ...
Is there an equivalent command for "ip tacacs source-interface" on ASA? We have a L2L VPN between 2 ASAs and AAA server is across the VPN tunnel and I want the ASA to go to ACS with source interface as inside, not outside. aaa-server command is poin...
