VPN

Hi All Need help. While I was installing anyconnect image i am getting below error in my lab with  IOS Version : ASA 8.4 (2) in GNS3 ciscoasa(config-webvpn)# anyconnect image disk0:/anyconnect-win-3.1.03103-k9.p$ERROR: Not a valid Anyconnect image - ...

Due to oversubscription of our ASA remote access box, we need to upgrade from SSP-20s to SSp-60s. Has anyone done this before? I'm trying to work out the best option to minimise downtime, move config and Apex licences, but can't find and upgrade proc...

Hey all,   i have a customer with an ASA 5505 and we use anyconnect for VPN connections. Everything works fine except for a reconnect at around 65 to 67 seconds after the initial connection.    I found this https://www.cisco.com/c/en/us/support/docs/...

With the latest release of the Cisco ASA iOS, they have added support for Virtual Tunnel Interfaces over IKEV2.  I have been able to successfully great a tunnel and pass traffic between my ASA Inside Network and my Azure Hosted Virtual network.  But ...

Hi Guys,   We have a Cisco ASA 5512-X, ASA Version: 9.2. When our Windows end users connect to VPN, they are unable to route out externally. They are however, able to route internally. This is not the same case for our Mac end users. They are able to...

Hello, I am using cisco SF100-24 switch in my network. It is directly connected to my core switch. I know that this switch doesn't support command line (CLI). But i am not sure about Web GUI. I want to use this switch for multiple Vlans means i want ...

Hi We have our guest wifi whos layer 3 SVI is on our ASA so that we can ensure it is not allowed to any inside networks. Now some long term guests need access to certain internal servers and already have anyconnect access from the outside. So now as ...

When I connect both to Fortinet SSL VPN and to Cisco VPN at the same time, I cannot use network provided by Forticlient (i.e. my PC cant see remote hosts, ping timeouts). Cisco VPN network works fine though. When I disconnect Cisco VPN, I can ping ne...

Dear Experts,   I am a newbee in this area. So please pardon me if I am not speaking the language of the technology.   In our company, I am trying configure a VPN connection. We had a DSL connection which was running through AVM FritzBox 7490.    I h...

We're receiving reports from our Macintosh users trying to connect through the Anyconnect client not being able to create a VPN tunnel. Looking at the ISE policies we are checking that the device being connected from matches our Corporate Device MAC ...

When attempting to ssh into the router the connection is never established..please see the following debug output:5494365: Jul 14 18:44:18.769 UTC: SSH0: starting SSH control process5494366: Jul 14 18:44:18.769 UTC: SSH0: sent protocol version id SSH...

Hi everyone,   I am reaching out to get your opinion on my below config, What i want to achieve is that a spoke having two vrf and two tunnels pointing to two different hubs, two eigrp instances with different AS numbers. Spoke will have two differne...