VPN

I got a VPN 3030 concentrator recently. Can anyone tell me if I can configure it as an internet router as well? I made VPN working for personal and Lan-to-Lan tunnels. However I can not access internet if I use this VPN as a gateway. Actually I can n...

What does choosing "deflate" for ssl compression do and what is the recommended setting? ASA platform with anyconnect thick client.

hello we have a C899 Secure Gigabit Ethernet with Multi-mode 4G LTE Router. there the Goal would be to use it in customers network building a IPsec connection to the HQ. in the Action the GSM Port is closed as soon the Ethernet Port is open and 8.8.8...

Hi friends.I have configured site-to-site VPN between two routers. When I apply crypto map to interface, data network working properly, but I can not connect branch switches via ssh.I need your helps. Head office router Configuration crypto isakmp po...

IPSEC  is not forming and IKE is forming.Please see the configuration and help to resolve. CISCO ASR1006 Configuration -------------------- crypto isakmp policy 10 encr 3des hash md5 authentication pre-sharecrypto isakmp key xx.x.x  address 0.0.0.0...

Hi All, I am in need on Assistance, i have 2 ASA 5515x, both different sites and they have an IPSEC (ikv1 tunnel ) across. The Traffic from currently both them is flowing just fine between the two local addresses from both ends. Now on ASA (1) i nee...

Buen día, Tengo un router  ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S2, RELEASE SOFTWARE (fc3), el cual tiene configurados tuneles GRE con las sedes. El día de hoy algunos tuneles se cayeron un momento y al revisar los logs...

I'm using AnyConnect 4.3.05.  When the connection drops for some reason, Anyconnect gets stuck in "Disconnect in Progress" mode.  I cannot seem to find a way to kill the app without rebooting my computer.  Is there any way to fix this?  What task can...

I have create a site to site VPN which is running and showing as up. It is between a Juniper System and my ASA 5505. When someone tries to ping from the Juniper side of the VPN I can see the following error message: "Asymmetric NAT rules matched for...

Hi Have created a site to site VPN between a 3rd party Juniper system and my Cisco ASA 5505. The VPN is showing as up. I have contacted my partner who can start the VPN from his juniper device and it works fine. How do I stop and start the VPN from ...

Hi, i have an requirement to create site to site vpn with ikeV1 hash SHA-256 with Group - 14 which version of ASA image will support in my ASA 5520? PHASE  1Exchange ModeMainAuthentication MethodPre-shared KeyEncryptionAES-256HashSHA-256Diffie-Hellm...

Hi All, Anyone can help look into this attach log which failure to establish the site to site tunnel with fortigate firewall appliances. Any idea standard guideline can be follow  peering tunnel with third parties firewall as mentioned ?