VPN

Hi , I have a pair of 2821 routers which are configured as ipsec hubs with inter-device redundancy . I use 2 interfaces with HSRP "HA-OUT" to terminate ipsec over vti tunnels and 2 interaces on with HSRP "HA-OUT-ENC" for encapsulated IPSEC .Question ...

We successfully created an ikev1 tunnel from ASA to a PIX. Moreover the ASA is not routing the traffic through the VPN  The ASA (9.5(1)) config is straightforward. It is connected to the internet using a public IP and using PAT with a single gateway...

Stumped here with an issue.  We're trying to make a case to dump MS directaccess in lieu of Anyconnect.  We have anyconnect (4.4) working great with machine certificates.  The problem we have is we need SBL to establish the VPN prior to the user logg...

Is their any way we can see if traffic is going through the VPN tunnel or not ? As an example, i got below ACL from my firewall and it has hitcounts as well. Wanted to check if any active traffic is passing through this tunnel or not anymore. It came...

Does anyone know if there is a switch I can use with the .msi install to create a desktop icon? It doesn't by default and I would like to have the desktop icon when installed. Thanks

I am trying to block telnet access to my router from external sources.  I did create an acl that only allowed ssh traffic from internal networks.  However, my security folks are doing their scans and tell me that telnet is still open on ports 6001 an...

Hi guys. I'm configuring easyvpn between two cisco routers where: cisco c891f - hub cisco c877w - spoke connection schema looks like: lan1 <> int e0 - c877w - int Dot11Radio0 <> non cisco wireless access point (35fg4AP) <> WAN <> int g7 - cisco c891f...

Hello, Since a few days I'm unable to connect with RA VPN IKEv1. I see these logs : 5|Jul 17 2017|11:13:08|713904|||||IP = 88.165.X.X, Received encrypted packet with no matching SA, dropping4|Jul 17 2017|11:13:07|113019|||||Group = Utilisateurs, U...

Cisco CSR1000v always send Traffic selectors 0.0.0.0/0 - 0.0.0.0/0 with IKEv1 Can you let Cisco CSR 1000v team know that there is a issue when Cisco CSR 1000v acts as initiator in AWS cloud?It sends 0.0.0.0/0 and 0.0.0.0/0 for SRC/DST Traffic select...

Hi, We have anyconnect running for remote users, anyconnect is configured to tunnel all traffic. Users have internet access over VPN. This anyconnect is only used to give the users secure access to the internet. Now we would like to only allow inte...