VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I want to use DHCP on the physical interface of my spoke routers from my broadband ISP. Since the address may change what can I do to ensure the the Hub is a responder and the spokes are the initiator of the DMVPN tunnels?Spokes: 2900'sHub: ASR1002

embowers1 by Level 1
  • 504 Views
  • 1 replies
  • 0 Helpful votes

Hello, we are considering to build site-to-site VPN, but, we have one public internet routerable IP address to assign VPN on Site A, but, Site B is ok.in this case, I think we have to use static NAT on the router, the simple diagram is like below. in...

syjeon by Level 1
  • 450 Views
  • 4 replies
  • 0 Helpful votes

I'm trying to bring up a L2L VPN and am having trouble. Packet tracer seems to allow it but the tunnel never gets created. What am I missing?asa5505# packet-tracer input inside tcp  10.1.3.2 25 172.19.104.2 25Phase: 1Type: ROUTE-LOOKUPSubtype: inputR...

Hi All, I have a quick question regarding site2site VPNs and static routes. Just to provide some background information, we have a site2site VPN tunnel and an MPLS link between 2 offices. The VPN tunnel encrypts all traffic for the local subnet at th...

I know remotely authenticate user accounts are created temporarily on the Nexus.  Is there documentation detailing this process?  I know one can show user-account to determine if an account is a remote or local account, but I want to know more about ...

ryanwalz by Level 1
  • 189 Views
  • 0 replies
  • 0 Helpful votes

Hi all,am try to configure RAvpn using i-map once and other using below config but my vpn client cant connect.Is there anything missing, plz help!hostname VPNRouTer!aaa new-model!aaa authentication login acs localaaa authorization network acs local!a...

Dear all,I'm trying to establish vpn session between 2 Cisco 892/k9 routers. but when i apply the crypto map in the GRE tunnel interface this type of message apears.  NOTE: crypto map is configured on tunnel interface.        Currently only GDOI cryp...

Hi All,I'm currently configuring a redundant setup of two ISR 4451-X routers. For some reason I don't get how to configure a high available IPSec Tunnel with Static Virtual Tunnel Interfaces (SVTI) on each router.Setup is as follows:ASA1- R1 -\      ...

Hi SeniorsI am putting question on Cisco site first time. Appreciate your quick help on this.I want to know the command to clear the counters (shown in red colour) on encryption/decryption hits on IPsec tunnel. Tunnel output given below. protected vr...

Hello. We're trying to establish site-to-site VPN between two ASA firewalls, let's call them ASA1 and ASA2. Problem is that ASA1 can't initiate connection. ISAKMP packets from ASA1 reach ASA2, but get dropped by some implicit rule.When ASA2 initiates...

sasha by Level 1
  • 3087 Views
  • 7 replies
  • 0 Helpful votes

Hello,I am getting the IPSEC ERROR: Advancing IPsec ring on Cisco ASA 5506.I have runnel between cisco ASA & Juniper SSG.Kindly find the show run.Cisco-ASA# show run: Saved:: Serial Number: xxxxxx: Hardware:   ASA5506, 4096 MB RAM, CPU Atom C2000 ser...

Hi,I have been looking into the ASA 5505 Hardware-Bundles and I have learnt that there are the following:- The Basic License, offering just 3 VLANs (the 3rd one restricted). It also offers just 2 SSL VPN AnyConnect Premium Licenses and 10 IPSec VPN (...