VPN

I have a network where the client router cannot pass encrypted traffic. I see the SAs form, the DMVPN tunnel is up and I am getting encrypt on one side. And here is where it is confusing, if I remove the transform-set everything is fine.  Home sidecr...

Hello , I have a DMVPN cloud with 40 spokes and 2 Hubs. The routing protocol is EIGRP. Some of the spokes are behind an ADSL modem and some are behind a 3G router(the spoke ip address is getting Natted to the modem public IP). Clearly the spokes does...

Hello,Upon connecting our setup uses two-factor authentication and we receive a text message from an application server to authenticate.  AnyConnect has a very short timeout for this though (just over 15 seconds) and we often have to try several time...

I am having an issue authenticating users via 802.1x/EAP-TLS across an IPSec tunnel. I am using route-based VPN with SVTI configuration on a 2921 and 1941. I have the following settings defined:- Under the tunnel interfaces:- MTU 1390- MSS 1350- PMTU...

I am receiving the following error when I try to establish an IPSEC tunnel in one of our branch .*Jan 19 14:16:37.059: %CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=2009 local=172.16.16.6 remote=172.16.16.1 spi=4A4D2438 se...

Attached screenshot of the error message. Operating System: Ubuntu 14.04 LTS, 64-bitAnyConnect Version: 3.1.10010I believe AnyConnect is supported in Ubuntu LTS versions, but still I face this issue. Please help me fix this. Thanks,Arun

Dear All,I can able to connect the SSL VPN through Cisco Anyconnect Mobility Client and Secure Routes (10.10.50.x and 192.168.1.x) i can able to access 10.10.50.x .. however i am unable to access the second 192.168.1.x network.... i am able to ping a...

Hi, I have a fully working GetVPN setup at work. We need to implement NAT on routers that fall in the path  (that is in path of the GetVPN GM servers). After struggling to make it work I found out in the Cisco Website "NAT is not supported in GETVPN"...

I have question concerning ISM modules (Cisco 2911) and various IOS versions.In interprise network there are some Cisco 2911 with ISM-VPN-29 modules and c2900-universalk9-mz.SPA.152-4.M3 IOS. All neccessary Data is encrypted by ISM modules. I'm using...

Hi there,   I have been looking for the AnyConnect packages on the Cisco.com site lately (ICS+, KNOX and the legacy Samsung AnyConnect) and I can't seem to find anything.I went to Google Play and was able to locate them, however, the only option I ha...

Hi We are going to have ipsec VPN (LAN to LAN) we have ASA 5510 The scenario is that customer has two IP subnets (192.168.1.0/24. 192.168.2.0/24). there outside IP address to which VPN will be make is 1.1.1.1 (suppose) the issue is that the customer ...