VPN

We have a Cisco ASA configured to accept anyconnect VPN clients.  This has been working and users can connect but they cannot ping or connect to anything.  Is there a command to reset the SSL VPN?  This has happened before and rebooting the firewall ...

Hi All,I need to create a remote access vpn tunnel to a cisco 866VAE-k9 (interfaceport GE0).i have tried multiple configuration options like i found them in the documentation, but wasn't able to get it to work. the current setup is:866VAE-k9 LAN ip: ...

Hi all, Currently working on a project that requires a site to site VPN using. We have chosen to authentication using Digital Certificates (rsasig on cisco). Please see below for an outline of the cisco configuration: crypto pki trustpoint ipsecvpnen...

Hi, I would like to verify my setup. If this is achievable in terms of IPSEC HA failover.Apparently the VPN headend is a 3925ISR.Primary link to remote sites will be via ISP 1 Direct lease line.If any of the lease line to/fro the remote site breaks, ...

has anyone setup a site to site vpn tunnel with Anyconnect access to one of the sites using 8.4 code?i have done it several times with 8.2 code but am missing something with 8.4.I get connected with the client, but cannot access internal resources.an...

Hey all, I'm setting up an IKEv1/L2TP tunnel for a remote branch office, and running into some problems.  I'll note here that the Anyconnect client works perfectly, as does the old Cisco VPN Client (Windows), but when configuring the built in Windows...

Hello,I have a ASA 5510 9.1(4)I need to configure two IPsec with same subnet destination, how to make?Site A 10.42.0.0/16 (principal site)Site B 192.168.7.0/24 (secondary site)Site C 192.168.7.2/32 (client site)The site A is my principale site and i ...

I'm trying to connect our RV325 into an OpenSwan instance in the AWS Cloud. I appear to have everything set up right, I get an allegedly successful connection, but attempting to make a connection between the networks does not work and the logs belie ...

We currently use Cisco ASA with AnyConnect clients and to authenticate, we use AD user accounts and their membership in security groups.  To get specific VPN access, they are filtered by AD security group memberships which assigns them a profile that...