Routing through Site-to-Site VPN and another location subnet

[phcunha01]

I have a setup wich includes a site-to-site VPN between two RV320 routers.

Everything is fine except for one reason, I need that users at LAN 1 connects to a network that is behind another router after Router2, for example:

VPN Router 1 Lan: 10.10.0.0/24

VPN Router 2 Lan: 10.20.0.0/24

Traffic between them works fine.

At the Router2 Location, we have another router on the same subnet. This router is connected to a MPLS to another location with Subnet 192.168.100.0/24.

All the advanced routing information only have LAN/WAN/USB interfaces as gateways, I think if it have a Tunnel1, 2, 3 as interfaces, maybe it should work?

Is there any way to tunnel the communication between Router 1 Lan and Subnet 192.168.100.0?

Thank you.

[filip00011]

You are not going to be able to achieve this with RV. You would need to have some real equipment.

I would recommend you to by ASA5506-X.