cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
543
Views
20
Helpful
4
Replies

Warning <Updater> wsa: The updater has been unable to communicate...

Eric23
Level 1
Level 1

Dear all,

We ‘ve been receiving a large number of emails with the exact same error, it seems that the updater has been unable to communicate with the update server, anyone has this error before?

The Warning message is:

 

The updater has been unable to communicate with the update server for at least 1h.

 

Last message occurred 36 times between Mon Jan 16 08:05:11 2023 and Mon Jan 16 09:03:15 2023.

 

Product: Cisco S600V Web Security Virtual Appliance

Model: S600V

Version: 12.5.1-043

Thank you,

1 Accepted Solution

Accepted Solutions

Pretty sure its this: https://www.cisco.com/c/en/us/support/docs/field-notices/725/fn72502.html

You should have received new license files from Cisco's automated TAC agent Sherlock.

If you didn't, open a TAC case and get updated files.

I had the same issue with VLNs supplied to me after the FN was published but before the automated set was sent. Applying the automated set fixed it.

View solution in original post

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

check some troubleshooting tips :

https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/117854-technote-esa-00.html

as per cisco 12.X eol - when you get chance upgrade to 14.X for better support.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

amojarra
Cisco Employee
Cisco Employee

Hello @Eric23 

 

also please note that there were some changes in the Certificates  :

Field Notice: FN - 72502 - Secure Web, Secure Management, and Secure Email Virtual Appliances Might Not Receive Updates After January 13, 2023 - Configuration Change Recommended - Cisco

 

 

on the other hand, to see more details about why you see that error in the Displayalerts, please check the Updater_logs from CLI >>Grep 

if there is any questions or concerns, feel free to reach out to us 

 

 

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++   If you find this answer helpful, please rate it as such  ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

Pretty sure its this: https://www.cisco.com/c/en/us/support/docs/field-notices/725/fn72502.html

You should have received new license files from Cisco's automated TAC agent Sherlock.

If you didn't, open a TAC case and get updated files.

I had the same issue with VLNs supplied to me after the FN was published but before the automated set was sent. Applying the automated set fixed it.

Eric23
Level 1
Level 1

Dear All,

Yes indeed it was the FN 72502 and yes soon we are planning an upgrade !!

Thank you all for your kind replies,